Elektron Musical Instruments

And use the mono outputs for a single bd

anyway it's really strange, coud be the cable or a defective unit

Il giorno 18/set/04, alle 13:53, roel ha scritto:

> have you tried to swap the left and right channel, to see if it's not 
> your
> cable which is causing the difference?
>
> best regards, roel
>
> ----- Original Message -----
> From: "gegge64" <vic20@...>
> To: <elektron-users@yahoogroups.com>
> Sent: Saturday, September 18, 2004 1:16 PM
> Subject: [elektron] Re: Stereo_issue with Machinedrum
>
>
>>
>> Hi, the outputs are routed to the Main Out's. I did a new measure,
>> and this time I measured the output levels on all the basdrums.
>> Here's the result:
>>
>> http://home.powertech.no/vhauge/Stereo_issue.htm
>>
>> In average, the right channel level of the Main Output is 0.36 dB
>> higer than left channel.
>>
>> What about the output levels on your MD....are they equal on both
>> channels ?
>>
>>
>> Thanks!
>>
>> Regards
>> Victor
>>
>> --- In elektron-users@yahoogroups.com, Federico Ciapi
>> <federico.ciapi@t...> wrote:
>>> Which output is the BD routed to?
>>>
>>> Il giorno 18/set/04, alle 00:54, gegge64 ha scritto:
>>>
>>>> When playing a mono source such as a bassdrum on my Machinedrum,
>> the
>>>> stereo field is not perfectly centered. I have to adjust the
>> panning
>>>> in the Routing section by -4 to get the stereo field centered.
>>>>
>>>> Se the following illustration:
>>>>
>>>> http://home.powertech.no/vhauge/Stereo_issue.htm
>>>>
>>>>
>>>> Anyone else who has this problem ?
>>>>
>>>>
>>>> Victor