Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Thread

Re: [elektron] Re: Stereo_issue with Machinedrum

Re: [elektron] Re: Stereo_issue with Machinedrum

2004-09-18 by roel

have you tried to swap the left and right channel, to see if it's not your
cable which is causing the difference?

best regards, roel

----- Original Message -----
Show quoted textHide quoted text
From: "gegge64" <vic20@...>
To: <elektron-users@yahoogroups.com>
Sent: Saturday, September 18, 2004 1:16 PM
Subject: [elektron] Re: Stereo_issue with Machinedrum


>
> Hi, the outputs are routed to the Main Out's. I did a new measure,
> and this time I measured the output levels on all the basdrums.
> Here's the result:
>
> http://home.powertech.no/vhauge/Stereo_issue.htm
>
> In average, the right channel level of the Main Output is 0.36 dB
> higer than left channel.
>
> What about the output levels on your MD....are they equal on both
> channels ?
>
>
> Thanks!
>
> Regards
> Victor
>
> --- In elektron-users@yahoogroups.com, Federico Ciapi
> <federico.ciapi@t...> wrote:
> > Which output is the BD routed to?
> >
> > Il giorno 18/set/04, alle 00:54, gegge64 ha scritto:
> >
> > > When playing a mono source such as a bassdrum on my Machinedrum,
> the
> > > stereo field is not perfectly centered. I have to adjust the
> panning
> > > in the Routing section by -4 to get the stereo field centered.
> > >
> > > Se the following illustration:
> > >
> > > http://home.powertech.no/vhauge/Stereo_issue.htm
> > >
> > >
> > > Anyone else who has this problem ?
> > >
> > >
> > > Victor
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Re: [elektron] Re: Stereo_issue with Machinedrum

2004-09-18 by Federico Ciapi

And use the mono outputs for a single bd

anyway it's really strange, coud be the cable or a defective unit

Il giorno 18/set/04, alle 13:53, roel ha scritto:
Show quoted textHide quoted text
> have you tried to swap the left and right channel, to see if it's not 
> your
> cable which is causing the difference?
>
> best regards, roel
>
> ----- Original Message -----
> From: "gegge64" <vic20@...>
> To: <elektron-users@yahoogroups.com>
> Sent: Saturday, September 18, 2004 1:16 PM
> Subject: [elektron] Re: Stereo_issue with Machinedrum
>
>
>>
>> Hi, the outputs are routed to the Main Out's. I did a new measure,
>> and this time I measured the output levels on all the basdrums.
>> Here's the result:
>>
>> http://home.powertech.no/vhauge/Stereo_issue.htm
>>
>> In average, the right channel level of the Main Output is 0.36 dB
>> higer than left channel.
>>
>> What about the output levels on your MD....are they equal on both
>> channels ?
>>
>>
>> Thanks!
>>
>> Regards
>> Victor
>>
>> --- In elektron-users@yahoogroups.com, Federico Ciapi
>> <federico.ciapi@t...> wrote:
>>> Which output is the BD routed to?
>>>
>>> Il giorno 18/set/04, alle 00:54, gegge64 ha scritto:
>>>
>>>> When playing a mono source such as a bassdrum on my Machinedrum,
>> the
>>>> stereo field is not perfectly centered. I have to adjust the
>> panning
>>>> in the Routing section by -4 to get the stereo field centered.
>>>>
>>>> Se the following illustration:
>>>>
>>>> http://home.powertech.no/vhauge/Stereo_issue.htm
>>>>
>>>>
>>>> Anyone else who has this problem ?
>>>>
>>>>
>>>> Victor

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.