Emax

EPROM version?

-----Original Message-----
From: brian_ronn <brian_ronn@...> [mailto:brian_ronn@...] 
Sent: Monday, February 17, 2003 12:54 PM
To: emax@yahoogroups.com
Subject: [emax] Re: EIII harddisk boot problem


It is the EIII (keyboard version). I've tried to boot up without the 
floppydisk in drive but the EIII just keeps scanning the scsi ID's 
from 0 to 7. The hd is formattet with OS2.42 and I've copied the 
software from floppy to the hd. I can access any module on the front 
panel which loads a bit of the OS software from the hd and I can also 
load entire banks from the hd. It just wont boot. Any suggestions?

--- In emax@yahoogroups.com, "Pedro H" <sotavento1999@h...> wrote:
> Is it Emu III or Emu III XP?
> 
>   ----- Original Message ----- 
>   From: Colin Ross 
>   To: emax@yahoogroups.com 
>   Sent: Friday, February 14, 2003 12:14 PM
>   Subject: Re: [emax] EIII harddisk boot problem
> 
> 
>   Hi There
>   do not put the disk in the floppy drive so it will search for the
one on the HD.
>   Cheers
> 
>   Colin
>     ----- Original Message ----- 
>     From: brian_ronn <brian_ronn@y...> 
>     To: emax@yahoogroups.com 
>     Sent: Thursday, February 13, 2003 11:05 PM
>     Subject: [emax] EIII harddisk boot problem
> 
> 
>     I have the OS2.42 boot disc (the latest OS) for the EIII. I've
set 
>     the scsi id this way: floppy id=0, hd=1 and EIII=6 but the EIII 
>     won't boot from the ST51080N hd. I have also formattet the hd
and 
>     copyed the software from diskette to hd, but the EIII won't
boot 
>     from the hd only from floppy. I can access banks on the hd and 
>     access any module via the frontpanel but just won't boot.
> 
>     Do you know the jumper settings on the Seagate ST51080N hd?
> 
>     I'm thinking about putting the hd to an external hd-case and I
would 
>     want to disconnect the power of the center ventilator which
cools 
>     the hd (because of the noise), would you advise me not to
disconnet 
>     the ventilator maybe because of the heat level on the pcb
boards?
> 
>     Thanx
> 
>     Brian
> 
> 
> 
> 
>     Emax and Emax II User's Group Website
> 
>     http://www.silveriafamily.com
> 
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service. 
> 
> 
>   [Non-text portions of this message have been removed]
> 
> 
>   Emax and Emax II User's Group Website
> 
>   http://www.silveriafamily.com
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service. 
> 
> 
> 
> [Non-text portions of this message have been removed]


Emax and Emax II User's Group Website

http://www.silveriafamily.com 

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/