Emax

The bootrom version on my EIII is 1.0. Can that be the problem?


--- In emax@yahoogroups.com, "Hermann Seib" <shadowcast@e...> wrote:
> EPROM version?
> 
> -----Original Message-----
> From: brian_ronn <brian_ronn@y...> [mailto:brian_ronn@y...] 
> Sent: Monday, February 17, 2003 12:54 PM
> To: emax@yahoogroups.com
> Subject: [emax] Re: EIII harddisk boot problem
> 
> 
> It is the EIII (keyboard version). I've tried to boot up without 
the 
> floppydisk in drive but the EIII just keeps scanning the scsi ID's 
> from 0 to 7. The hd is formattet with OS2.42 and I've copied the 
> software from floppy to the hd. I can access any module on the 
front 
> panel which loads a bit of the OS software from the hd and I can 
also 
> load entire banks from the hd. It just wont boot. Any suggestions?
> 
> --- In emax@yahoogroups.com, "Pedro H" <sotavento1999@h...> wrote:
> > Is it Emu III or Emu III XP?
> > 
> >   ----- Original Message ----- 
> >   From: Colin Ross 
> >   To: emax@yahoogroups.com 
> >   Sent: Friday, February 14, 2003 12:14 PM
> >   Subject: Re: [emax] EIII harddisk boot problem
> > 
> > 
> >   Hi There
> >   do not put the disk in the floppy drive so it will search for 
the
> one on the HD.
> >   Cheers
> > 
> >   Colin
> >     ----- Original Message ----- 
> >     From: brian_ronn <brian_ronn@y...> 
> >     To: emax@yahoogroups.com 
> >     Sent: Thursday, February 13, 2003 11:05 PM
> >     Subject: [emax] EIII harddisk boot problem
> > 
> > 
> >     I have the OS2.42 boot disc (the latest OS) for the EIII. I've
> set 
> >     the scsi id this way: floppy id=0, hd=1 and EIII=6 but the 
EIII 
> >     won't boot from the ST51080N hd. I have also formattet the hd
> and 
> >     copyed the software from diskette to hd, but the EIII won't
> boot 
> >     from the hd only from floppy. I can access banks on the hd 
and 
> >     access any module via the frontpanel but just won't boot.
> > 
> >     Do you know the jumper settings on the Seagate ST51080N hd?
> > 
> >     I'm thinking about putting the hd to an external hd-case and I
> would 
> >     want to disconnect the power of the center ventilator which
> cools 
> >     the hd (because of the noise), would you advise me not to
> disconnet 
> >     the ventilator maybe because of the heat level on the pcb
> boards?
> > 
> >     Thanx
> > 
> >     Brian
> > 
> > 
> > 
> > 
> >     Emax and Emax II User's Group Website
> > 
> >     http://www.silveriafamily.com
> > 
> >     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service. 
> > 
> > 
> >   [Non-text portions of this message have been removed]
> > 
> > 
> >   Emax and Emax II User's Group Website
> > 
> >   http://www.silveriafamily.com
> > 
> >   Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service. 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/