Emax

Sorry I just noticed this was a post for IDE...

-RVK

> On Jun 15, 2014, at 4:46 AM, "Robert Van Kuran guitar5l50@... [emax]" <emax@yahoogroups.com> wrote:
> 
> As long as you can set the internal Zip to SCSI Device 0 when your SCSI HDD is not present, then you can boot from SCSI.
> 
> In my case I have modded my Emax to have external SCSI w/ an external Zip Drive which can only be set to SCSI Device ID 5 or 6. So I must still boot the Emax Plus 1.0 OS from the FDD because SCSI Device ID 0 is needed to be present in order to boot via SCSI.
> 
> Once booted then I can load banks from any SCSI by setting the Emax SCSI ID to read Device ID 5 or 6 for my external Zip drive by pressing the Transpose and then the number pad buttons to select.
> 
> Hope that helps.
> 
> -RVK
> 
>> On Jun 15, 2014, at 4:25 AM, "niklas.ehrlin@... [emax]" <emax@yahoogroups.com> wrote:
>> 
>>  
>> And forgot to mention that this is a SCSI version that I have of the Zip-drive.
>> 
>> Niklas
> 
>