Emax

thats what i though but in mine it is set up floppy #0 hd #1. if 
there is a way to switch this i am all ears. as this may solve part 
of the problem but i have searched and cannot find a way to correct 
this.

--- In emax@yahoogroups.com, "elmacaco" <elmacaco@h...> wrote:
> Isn't the internal HD SCSI ID# 0?  The floppy is not scsi iirc.
> 
>   ----- Original Message ----- 
>   From: fred 
>   To: emax@yahoogroups.com 
>   Sent: Friday, April 08, 2005 12:05 PM
>   Subject: [emax] connecting zip drive to emax 2
> 
> 
> 
>   hello i was wondering if someone could help me with this.
>   i have an emax2 i recently bought an external iomega zip 100 
which i 
>   hooked up to the scsi port on the back of the emax, powered up 
the 
>   drive and then turned on the emax. when the zip drive is hooked 
up my 
>   emax cannot find it or my internal hd which is scsi#1. floppy is 
>   scsi#0 zip drive is not found at all. i'm sure i'm doing 
somthing 
>   wrong but i cannot find out what. any help would be greatly 
>   appreciated.
>   thank you.
> 
> 
> 
> 
> 
>   Emax and Emax II User's Group Website
> 
>   http://www.silveriafamily.com 
> 
> 
> 
> -------------------------------------------------------------------
-----------
>   Yahoo! Groups Links
> 
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/emax/
>       
>     b.. To unsubscribe from this group, send an email to:
>     emax-unsubscribe@yahoogroups.com
>       
>     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms 
of Service. 
> 
> 
> 
> [Non-text portions of this message have been removed]