Emax

This definitely works....
http://users.skynet.be/emxp/ (use the image in the files section here)

make sure you have a double density disk

if it still doesnt work,,,check the jumper settings on your floppy 
drive as this is most likely your issue (a post on these settings 
have bee posted recently enough)

--- In emax@yahoogroups.com, Jip Harrio <harrioj@...> wrote:
>
> I went through exaactly what you are going through.
> 
> 
> 
> --- booboopus <mail736786@...> wrote:
> 
> > Hi there,
> > 
> > Is anyone out there able to send me a boot disk for
> > the Emax 1. I will 
> > pay you for your troubles...
> > 
> > The unit was given to me without disks, so I tried
> > making some by 
> > booting in DOS 6.22 and using EMX to write to a
> > DS/DD disk with version 
> > 3.2 of the OS. Unfortunately, it fails to load ,
> > going into an infinite 
> > loop during startup. I can hear four clicks from the
> > floppy, then the 
> > front panel lights flash, repeat....
> > 
> > Perhaps the floppy is dead?  Any help appreciated.
> > 
> > 
> 
> 
> 
>  
> 
______________________________________________________________________
______________
> Need a quick answer? Get one in minutes from people who know.
> Ask your question on www.Answers.yahoo.com
>