Emax

The EMAX-I always boots from SCSI ID 0 or floppy.
It is not possible to boot from an external ZIP drive. But you can 
use an internal zip drive :-)

///E-Synthesist

--- In emax@yahoogroups.com, "mikewolak" <mikewolak@...> wrote:
>
> Hello,
> 
> Today I replaced the internal 20MB Miniscribe HD with a 1GB Seagate 
but in order for my 
> EMAX to boot off this HD I had to set the SCSI ID to 0.  With the 
EMAX Plus OS I am able to 
> select a different SCSI ID when the sampler is booted however from 
a cold boot it always 
> returns to 0. Is this normal? If so , how could you boot from an 
external zip drive if the only 
> ID's offered on those drives are 5 or 6? I need to hammer this out 
before I decide to hack an 
> external SCSI connector into the back of the machine. 
> 
> 
> Thanks,
> 
> Mike Wolak
>