Emax

Excellent, thanks a lot!


--- esynthesist <esynthesist@...> wrote:

> The EMAX-I always boots from SCSI ID 0 or floppy.
> It is not possible to boot from an external ZIP drive.
> But you can 
> use an internal zip drive :-)
> 
> ///E-Synthesist
> 
> --- In emax@yahoogroups.com, "mikewolak" <mikewolak@...>
> wrote:
> >
> > Hello,
> > 
> > Today I replaced the internal 20MB Miniscribe HD with a
> 1GB Seagate 
> but in order for my 
> > EMAX to boot off this HD I had to set the SCSI ID to 0.
>  With the 
> EMAX Plus OS I am able to 
> > select a different SCSI ID when the sampler is booted
> however from 
> a cold boot it always 
> > returns to 0. Is this normal? If so , how could you
> boot from an 
> external zip drive if the only 
> > ID's offered on those drives are 5 or 6? I need to
> hammer this out 
> before I decide to hack an 
> > external SCSI connector into the back of the machine. 
> > 
> > 
> > Thanks,
> > 
> > Mike Wolak
> >
> 
> 
>