Emax

SCSI upgrade has nothing to do with the Mac connectivity that I am aware of.

I don't think Emax 1 has SCSI dump.

The SCSI upgrade will allow you to:
1) Boot faster
2) Save 35 banks to HD, Zip, or compact flash/SD. - 1 flash is much easier
to work with than 35 floppy disks.
3) Switch banks in a very short time (couple of seconds).

Regards,
Ted



On Mon, Feb 2, 2009 at 12:19 PM, poumpoumchak <cruising@...> wrote:

>   Hello Esynthesist,
>
> Thanks for this good new ! I could not do the test myself : I have no
> more soft at this time in the Mac able to save samples as 12 bits
> lengh, and could not find any converter to 12 bits... and C6 does not
> convert anything (it only sends Wav, Aiff, and Sns Files). I read
> again the Emax1 manual and did not found anything speaking about midi
> dump. I looked at midi-OX that would be interesting..but one more time
> not for mac.
>
> About the compatibility of the compressed banks from the EmaxII, I
> made a new test today with a bank of single samples (with the device
> dual off) on the EmaxII when saving, and had again a strange panning
> when loaded in the Emax1 (+-85% an+-15% again) I shall try tomorrow to
> find the pan function in the E1 and understand why.
>
> If you want me to test some softs evolutions on Mac, I can do it for
> you (actually with a PPC Mac Pro 2 x 2,5Ghz)under os X.4.11, and soon
> with Intel processor (just waiting for the next generation of Mac Pro)
>
> A last question : what would permit the Ted Summers SCSI upgrade to do
> for a Mac user ?
>
> Thanks in advance
>
>
> --- In emax@yahoogroups.com <emax%40yahoogroups.com>, "esynthesist"
> <esynthesist@...> wrote:
> >
> > Today I checked if MIDI SDS is working fine on the Emax-I.
> > And it does.
> > But the samples must be in 12-bit unsigned format. I don't know if C6
> > or any other sample dump software supports this. The tests I've done
> > were with MIDI-OX but that's not the best tool to do sample dumps
> > with :-)
> > And I used the Emax Plus OS.
> >
> > ///E-Synthesist
> > --- In emax@yahoogroups.com <emax%40yahoogroups.com>, "esynthesist"
> <esynthesist@> wrote:
> > >
> > > If the Emax-I supports SDS then it would be possible to make
> > software
> > > which uses the standard MIDI ports to send/receive complete .EM1
> > > banks to/from the Emax. As far as I remember the Emax-II supports
> > > SDS, but I'm not sure about the Emax-I and I also don't know about
> > > the 12bit/16bit requirement (perhaps I will check this one of these
> > > days).
> > >
> > > Anyway, in both cases you have to be aware that this operation mode
> > > will be VERY slow. Sending 512K of sample data across 31.25 kBaud
> > > lines will take some time (up to minutes...).
> > > This software can be built for Windows, Mac and Linux, but at this
> > > point in time I don't have a "modern" Mac sitting here...
> > > EMXP can be extended with this MIDI dump function, but I'd rather
> > > wait with this feature until the RS422 hardware project is finished
> > > (see other messages). The advantage of the RS422 is its speed. But
> > > once I write software for RS422, I can make it compatible with full
> > > (slow) MIDI SDS also.
> > >
> > > Of course you can use already any MIDI scripting tool for Mac, but
> > > then you'll have to insert different MIDI instructions (manually ?)
> > > for each different .EM1/.EM2 bank. I guess this is not what
> > > musicians/producers call a great solution for getting a good flow
> > in
> > > the production process :-)
> > >
> > > Related to your panning (stereo field) issue: this is most probably
> > > caused by the difference in the Emax-I "Dual Voice" definition and
> > > the Emax-II "Stereo Voice" definition. If these settings are OFF,
> > > you'll not encounter any problem.
> > > But once they're ON, the translated results can have panning
> > > problems. I know that EMXP also suffers from this: I just
> > translated
> > > my whole Emax-II library to Emax-I with EMXP and I have panning
> > > problems too. I was thinking about changing EMXP in such way that
> > it
> > > doesn't set Dual Voice ON (Emax-I) when the Stereo Voice is ON
> > (Emax-
> > > II), but I'm still doubting because Emu itself is also translating
> > > these parameters like this (= when you save a bank on Emax-II into
> > > compressed format, like you did).
> > > Anyway: you could try to set Stereo Voice OFF before saving it to
> > > compressed format on an Emax-II, or you can switch Dual Voice OFF
> > > after loading it on an Emax-I.
> > > But be aware that - by doing this - you *may* be solving panning
> > > problems but *may* also be introducing other important sound
> > > differences...
> > >
> > > ///E-Synthesist
> > >
> > > --- In emax@yahoogroups.com <emax%40yahoogroups.com>, "poumpoumchak"
> <cruising@> wrote:
> > > >
> > > > Hello esynthesist,
> > > >
> > > > Thanks for your answer. The idea to have a link between Mac/PC
> > and
> > > the
> > > > emax1 (andII) is really a great hope.
> > > > As (many) a mac user(s) , I don't actually have solution to make
> > any
> > > > evolution in the Emax1/II banks or to import existing banks, and
> > the
> > > > old softs solutions are really difficult to use in a fluent studio
> > > > working (I have dowloaded alchemy, olds macUU and lc475,630,g4..,
> > > but
> > > > no more serial midi port).
> > > > The little midi dump soft C6 permited me to send samples from my
> > G5
> > > to
> > > > the emaxII, and it was for me a really great victory : i was
> > wayting
> > > > for that since nearly 15 years : the last bank exchange i could
> > made
> > > > was between a Prophet 2000 and Mac Sound Designer such a long
> > ago...
> > > > And creating presets to manages these dump samples in the Emax is
> > > > really not easy with a 2 lines display...
> > > > So, the Rs422 adapter (usb?) would be really welcome an if EMXP
> > > could
> > > > be used with, it would be a new life for the Emaxs...
> > > >
> > > > I tried to make a little test last week : to mount the same bank
> > > from
> > > > the EmaxII in the EIIIxp, EIVUltra, and in the Emax1 via
> > compression
> > > > and floppy save from the EmaxII. (This was to sample and compare
> > > > results in my Daw with a same midi file play).
> > > > The compressed banks coming from the Emax II have a panning
> > problem
> > > > when I load them on the Emax1 : I have +- 85 % of the sound left
> > and
> > > > 15% right or the inverse, depending on the banks. Did I made
> > wrong a
> > > > step ? Is there a way to avoid this problem ?
> > > >
> > > > Is it possible (with C6 or other soft) to send to the Emax1
> > samples
> > > > via midi dump ?
> > > > Have these samples to be 12 bits ? I tried to send 16 bits
> > samples
> > > and
> > > > the Em1 sent me a handshaking problem answer. Is it because of the
> > > > format, or the sds implementation ?
> > > >
> > > > Thanks in advance (and long way to EMXP !)
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --- In emax@yahoogroups.com <emax%40yahoogroups.com>, "esynthesist"
> <esynthesist@> wrote:
> > > > >
> > > > > Currently there's no way to transfer complete banks via MIDI
> > > sysex
> > > > > towards the Emax (I/II), except for the vintage "Sound Designer
> > > for
> > > > > Emax" Mac software which is capable of doing something like
> > this
> > > but
> > > > > it only works for Emax-I.
> > > > > Some members on this board were also trying to build a piece of
> > > > > hardware which can "replace" the RS422 ports of the old Mac,
> > and
> > > > > which can be connected to a new PC or Mac. Once this is done,
> > > it's a
> > > > > simple thing to create software for both Windows and Mac which
> > is
> > > > > able to do exactly what you're asking for.
> > > > > But I didn't hear from those guys for some time anymore, so I
> > > assume
> > > > > their experiments are not successful :-)
> > > > > As far as I know, Chickensys Translator does not support MIDI
> > > > > communication with any sampler. They focus on file- or disk
> > based
> > > > > translations (like EMXP) but it's true that there's some delay
> > on
> > > > > full support for the Emax-II. As far as I know the current
> > > version
> > > > > already supports Emax-II in "some way" (not Emax-I).
> > > > >
> > > > > By the way, Rei: I'm very sorry to hear that this is your
> > opinion
> > > > > about EMXP...
> > > > >
> > > > > ///E-Synthesist
> > > > >
> > > > > --- In emax@yahoogroups.com <emax%40yahoogroups.com>, "Rei"
> <vjrei@> wrote:
> > > > > >
> > > > > > Please, go over with your request to the people of chicken
> > > systems.
> > > > > I have been asking them
> > > > > > for ever to have suport for the emax II samplesr and they
> > told
> > > me
> > > > > that by las October they
> > > > > > probably had something.
> > > > > >
> > > > > > I believe that with preassure they can spend some good time
> > > into
> > > > > the emax compatibility
> > > > > > because the EMXP is too absurrb and I really need a Mac
> > > software as
> > > > > well just because the
> > > > > > emax still amazing!!!
> > > > > >
> > > > >
> > > >
> > >
> >
>
> 
>


[Non-text portions of this message have been removed]