Emax

Yes. it was that simple. 

Here are some pics:

The old PSU marked up. It would actually have been quite difficult to connect it wrongly but better safe than sorry:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%20in%20Emax.jpg

No PSU:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/PSU%20gone.jpg

And the new one in. It is very slightly bigger than the old one:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/New%20PSU%20in.jpg

Back together:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/back%20together.jpg

Back home:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/back%20home.jpg

These are some close-ups of the old PSU from which you may or may not be able to see what was wrong with it:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%201.jpg

This looks pretty horrible:

http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%202.jpg

http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%203.jpg

http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%204.jpg



Regards to all,

D.


  ----- Original Message ----- 
  From: drifter7508 
  To: emax@yahoogroups.com 
  Sent: Friday, November 27, 2009 4:11 PM
  Subject: [emax] Re: Emax II RIP? (not!)


    
  Great to hear that all worked out for you Daniel!
  Was it just to replace to the PSU straight off?
  Just replace and reattach the cables?

  --- In emax@yahoogroups.com, "Daniel Baum" <daniel@...> wrote:
  >
  > PS.
  > 
  > I forgot to add in my previous message: Thanks to whoever it was that (apparently) correctly diagnosed my problem!
  > 
  > Daniel
  > 
  > 
  > ----- Original Message ----- 
  > From: Daniel Baum 
  > To: emax@yahoogroups.com 
  > Sent: Friday, November 27, 2009 3:21 PM
  > Subject: Re: [emax] Re: Emax II RIP? (not!)
  > 
  > 
  > 
  > Hi all,
  > 
  > Mine seems to be fixed! Installing the PSU was literally a 5-minute job, and the Emax II turned on and played when I tested it.
  > 
  > I may have been imagining it, but it also seemed quieter. Possibly the old PSU was making a noise.
  > 
  > I'll send pictures later on.
  > 
  > Highly recommended.
  > 
  > D.
  > 
  > Got mine today! Very fast shipping from Miami to Sweden I must say,
  > 1 week. =) I will try to install it in my Emax II tonight.
  > Hope its just to replace the old PSU without modifications
  > to this "new" unit. My old PSU is actually working fine. Its just that
  > whining sound that comes when i load from the HD that worries me.
  > So if anyone wants to buy my old PSU and fix it up or something you can contact me.
  > 
  > --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
  > >
  > > Mine arrived yesterday. All I have had time to do was open the box and look at it.
  > > 
  > > I don't foresee any problems installing it. I will mark all of the plugs to make sure I plug them in the right way.
  > > 
  > > I probably won't have time to do it until the weekend.
  > > 
  > > I will post photos etc when I do it.
  > > 
  > > 
  > > Daniel
  > > 
  > > 
  > > 
  > > My PSU was shipped today so I will recieve it in a week or two.
  > > Please share your install procedure and tell us how it goes
  > > there is anything else to do then to "just replace" it with the old one =)
  > > 
  > > --- In emax@yahoogroups.com, "dbaum0000" <daniel@> wrote:
  > > >
  > > > 
  > > > 
  > > > --- In emax@yahoogroups.com, "drifter7508" <drifter7508@> wrote:
  > > > >
  > > > > 
  > > > > I just ordered one yesterday for my Emax II from that company.
  > > > > I will let you all know how it goes.
  > > > >
  > > > 
  > > > I also ordered one and I'm supposed to be receiving it today.
  > > > 
  > > > Hopefully my Emax II should be back up and running quite soon.
  > > > 
  > > > Is there anything I should know about before installing it? According to the seller it is practically identical to the original and a simple swap.
  > > > 
  > > > 
  > > > Daniel
  > > >
  > > 
  > > 
  > > 
  > > 
  > > 
  > > [Non-text portions of this message have been removed]
  > >
  > 
  > [Non-text portions of this message have been removed]
  > 
  > 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  

[Non-text portions of this message have been removed]