Emax

Great pictures Daniel! Piece of cake then.
Thx! Gonna install mine now after work.



--- In emax@yahoogroups.com, "Daniel Baum" <daniel@...> wrote:
>
> Yes. it was that simple. 
> 
> Here are some pics:
> 
> The old PSU marked up. It would actually have been quite difficult to connect it wrongly but better safe than sorry:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%20in%20Emax.jpg
> 
> No PSU:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/PSU%20gone.jpg
> 
> And the new one in. It is very slightly bigger than the old one:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/New%20PSU%20in.jpg
> 
> Back together:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/back%20together.jpg
> 
> Back home:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/back%20home.jpg
> 
> These are some close-ups of the old PSU from which you may or may not be able to see what was wrong with it:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%201.jpg
> 
> This looks pretty horrible:
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%202.jpg
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%203.jpg
> 
> http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%204.jpg
> 
> 
> 
> Regards to all,
> 
> D.
> 
> 
>   ----- Original Message ----- 
>   From: drifter7508 
>   To: emax@yahoogroups.com 
>   Sent: Friday, November 27, 2009 4:11 PM
>   Subject: [emax] Re: Emax II RIP? (not!)
> 
> 
>     
>   Great to hear that all worked out for you Daniel!
>   Was it just to replace to the PSU straight off?
>   Just replace and reattach the cables?
> 
>   --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
>   >
>   > PS.
>   > 
>   > I forgot to add in my previous message: Thanks to whoever it was that (apparently) correctly diagnosed my problem!
>   > 
>   > Daniel
>   > 
>   > 
>   > ----- Original Message ----- 
>   > From: Daniel Baum 
>   > To: emax@yahoogroups.com 
>   > Sent: Friday, November 27, 2009 3:21 PM
>   > Subject: Re: [emax] Re: Emax II RIP? (not!)
>   > 
>   > 
>   > 
>   > Hi all,
>   > 
>   > Mine seems to be fixed! Installing the PSU was literally a 5-minute job, and the Emax II turned on and played when I tested it.
>   > 
>   > I may have been imagining it, but it also seemed quieter. Possibly the old PSU was making a noise.
>   > 
>   > I'll send pictures later on.
>   > 
>   > Highly recommended.
>   > 
>   > D.
>   > 
>   > Got mine today! Very fast shipping from Miami to Sweden I must say,
>   > 1 week. =) I will try to install it in my Emax II tonight.
>   > Hope its just to replace the old PSU without modifications
>   > to this "new" unit. My old PSU is actually working fine. Its just that
>   > whining sound that comes when i load from the HD that worries me.
>   > So if anyone wants to buy my old PSU and fix it up or something you can contact me.
>   > 
>   > --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
>   > >
>   > > Mine arrived yesterday. All I have had time to do was open the box and look at it.
>   > > 
>   > > I don't foresee any problems installing it. I will mark all of the plugs to make sure I plug them in the right way.
>   > > 
>   > > I probably won't have time to do it until the weekend.
>   > > 
>   > > I will post photos etc when I do it.
>   > > 
>   > > 
>   > > Daniel
>   > > 
>   > > 
>   > > 
>   > > My PSU was shipped today so I will recieve it in a week or two.
>   > > Please share your install procedure and tell us how it goes
>   > > there is anything else to do then to "just replace" it with the old one =)
>   > > 
>   > > --- In emax@yahoogroups.com, "dbaum0000" <daniel@> wrote:
>   > > >
>   > > > 
>   > > > 
>   > > > --- In emax@yahoogroups.com, "drifter7508" <drifter7508@> wrote:
>   > > > >
>   > > > > 
>   > > > > I just ordered one yesterday for my Emax II from that company.
>   > > > > I will let you all know how it goes.
>   > > > >
>   > > > 
>   > > > I also ordered one and I'm supposed to be receiving it today.
>   > > > 
>   > > > Hopefully my Emax II should be back up and running quite soon.
>   > > > 
>   > > > Is there anything I should know about before installing it? According to the seller it is practically identical to the original and a simple swap.
>   > > > 
>   > > > 
>   > > > Daniel
>   > > >
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > [Non-text portions of this message have been removed]
>   > >
>   > 
>   > [Non-text portions of this message have been removed]
>   > 
>   > 
>   > 
>   > 
>   > 
>   > [Non-text portions of this message have been removed]
>   >
> 
> 
> 
>   
> 
> [Non-text portions of this message have been removed]
>