Emax

Checked the sockets, everything looked ok.  What happens is the hard drive will spin up twice and then just go into standby mode, meanwhile the emax is searching through scsi finding nothing... then if I leave the emax on just sitting there searching scsi for atleast 5-10mins and restart the hard drive will kick in instantly.  And will do so until I turn it off for an extended period of time.  It's almost like something is discharged after a while and then it takes 5-10 mins to charge it back up before the hard drive will kick.

Any ideas?

--- In emax@yahoogroups.com, "emax_dx5" <cadena100rb@...> wrote:
>
> I had some similar problem, in my case it was a bad power supply connection. HD didn't reach the right rpm as the voltage were intermitent. Check the sockets.
> 
> 10 mins is a crazy time for booting hd.
> 
> --- In emax@yahoogroups.com, "andykinnetz" <akinnetz@> wrote:
> >
> > So I'm having a slight annoyance with my Emax II.  It seems I need to wait for something to warm up before the hard drive will kick on.  I hear it spin up but it won't boot until maybe 10 mins after restarting multiple times.
> > 
> > This has happened with the original emax drive and a new drive I recently installed.  I have the scsi boot id set correctly.  Anyone have any idea what could be causing the problem?
> > 
> > Cheers
> >
>