Emax

I have also seen that after SCSI retrofit where the connections on the EPROM
socket aren't good.
If the system is locked up, poweroff and remove and reseat the EPROM.

Just a thought.

Regards,
Ted

On Fri, Feb 19, 2010 at 7:17 AM, esynthesist <esynthesist@...> wrote:

>
>
> I have exactly the same problem with the LCD on my Emax Plus Rack.
> But the problem only occurs when hitting the buttons on the front panel too
> hard... as long as I'm gentle I have normal readout instead of maximum
> contrast on the upper line and minimum contrast on the lower line (because
> that's what it seems to be, if you look hard you can probably read
> characters "behind" the dark line of boxes).
>
> So I guess it's an LCD problem also - or a PCB problem of the front panel.
> I don't think it's the CPU or PSU because those wouldn't be influenced by
> pressing buttons harder (in my case).
>
> I'll have a look at it myself in the near future; I'm now repairing other
> stuff...
>
> ///E-Synthesist
>
>
> --- In emax@yahoogroups.com <emax%40yahoogroups.com>, "jammie"
> <jammie.emma@...> wrote:
> >
> > thats either a lcd malfunction or a cpu fault not sending the 8 bit
> binary info
> > ----- Original Message -----
> > From: modd33@...
> > To: emax@yahoogroups.com <emax%40yahoogroups.com>
> > Sent: Friday, February 19, 2010 12:15 PM
> > Subject: [emax] Emax I - LCD problem
> >
> >
> >
> > Hi,
> >
> > i changed the Emax I PSU (the new one is from an old PC) the Emax is
> still fully working except for the
> > LCD (which was the only reason for changing the PSU).
> > Please see the folder with the photos i made from the problem in differnt
> viewing angles.
> >
> > http://groups.yahoo.com/group/emax/photos/album/760799298/pic/list
> >
> > Thanks for helping
> > Tony
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2697 - Release Date: 02/19/10
> 07:34:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>


[Non-text portions of this message have been removed]