Emax

Hi,

Has anyone had this issue while booting from CF card in the EMAX II...

I'm using the Acard AEC7720U SCSI-to-IDE bridge, trying a variety of IDE-CF card readers and a variety of CF cards. 

All the IDE-CF card readers / adaptors seem to format and boot OK.
Half the CF cards themselves seem to work fine (some have SCSI hardware errors, so I put those to one side and stick to the ones that work - Transcend 2GB for example).

But even though I can format a card and the EMAX II will boot from it, when I then access any menu, the display will read: "No presets exist". When I check the memory, it is full - no space at all to create anything! I can clear the memory and return to the full 8 megs and I can switch to the floppy drive and work from that, so it's this problem is not locking the machine up, and there are no hardware or SCSI errors, just memory issues.

Any help with this would be appreciated,

Thanks.