Emax

dont use transcend cards they never work properly with any of the samplers sandisk are the most reliable 

it also sounds like you have a os problem or that the os is currupted some how and is causing memry problems 

when you clear the memory are you able to access the presets and load banks
  ----- Original Message ----- 
  From: Lee 
  To: emax@yahoogroups.com 
  Sent: Thursday, August 12, 2010 11:24 AM
  Subject: [emax] EMAXII errors: "No Presets Exist" and no memory


    
  Hi,

  Has anyone had this issue while booting from CF card in the EMAX II...

  I'm using the Acard AEC7720U SCSI-to-IDE bridge, trying a variety of IDE-CF card readers and a variety of CF cards. 

  All the IDE-CF card readers / adaptors seem to format and boot OK.
  Half the CF cards themselves seem to work fine (some have SCSI hardware errors, so I put those to one side and stick to the ones that work - Transcend 2GB for example).

  But even though I can format a card and the EMAX II will boot from it, when I then access any menu, the display will read: "No presets exist". When I check the memory, it is full - no space at all to create anything! I can clear the memory and return to the full 8 megs and I can switch to the floppy drive and work from that, so it's this problem is not locking the machine up, and there are no hardware or SCSI errors, just memory issues.

  Any help with this would be appreciated,

  Thanks.



  


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.441 / Virus Database: 271.1.1/3066 - Release Date: 08/12/10 06:34:00


[Non-text portions of this message have been removed]