Emax

That is the procedure I suspected. Thanks a lot! :) I will give it a try. I am still interested in other possibilities. :)

--- In emax@...m, Jason Mc <jasonmcdougal@...> wrote:
>
> When I updated my Emax  to the cf drive, I needed to keep a floppy drive
> installed. After I booted the floppy with the HD OS, I then formatted and
> transferred the OS to the CF Card.
> After this  was complete, I turned off the unit jumpered the floppy pins and
> removed the floppy drive. Now my Emax boots from the CF Drive and I can
> remove the CF drive and add banks to it via EMXP.
> All works great.
> 
> On Wed, Mar 16, 2011 at 8:24 PM, Matthieu Roche <roche.matthieu@...>wrote:
> 
> >
> >
> > Hi all,
> >
> > I own an Emax HD, and I just installed the card reader, following Ted
> > Summers'instructions. The problem is that the Emax runs the HD OS 1.1 (not
> > SE). Using EMXP, I can't install the OS on the SD card, because EMXP tells
> > me I have to use the Plus OS. Is there another way to install the HD OS on
> > the SD card?
> >
> > Thanks a lot!
> >
> > Matthieu
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>