Emax

I will check if I can change this in EMXP, and if it is possible to add support for the OS HD and OS SE HD on removable media. 
To be honest I didn't even remember that I had built in a restriction to the Plus OS only - after checking the code it seems this was done because I couldn't test/confirm the other possibilities at that time.

If the change is small, it will be part of the next version v2.10 (expected in the coming weeks).

///E-Synthesist

--- In emax@yahoogroups.com, "Matthieu Roche" <roche.matthieu@...> wrote:
>
> That is the procedure I suspected. Thanks a lot! :) I will give it a try. I am still interested in other possibilities. :)
> 
> --- In emax@yahoogroups.com, Jason Mc <jasonmcdougal@> wrote:
> >
> > When I updated my Emax  to the cf drive, I needed to keep a floppy drive
> > installed. After I booted the floppy with the HD OS, I then formatted and
> > transferred the OS to the CF Card.
> > After this  was complete, I turned off the unit jumpered the floppy pins and
> > removed the floppy drive. Now my Emax boots from the CF Drive and I can
> > remove the CF drive and add banks to it via EMXP.
> > All works great.
> > 
> > On Wed, Mar 16, 2011 at 8:24 PM, Matthieu Roche <roche.matthieu@>wrote:
> > 
> > >
> > >
> > > Hi all,
> > >
> > > I own an Emax HD, and I just installed the card reader, following Ted
> > > Summers'instructions. The problem is that the Emax runs the HD OS 1.1 (not
> > > SE). Using EMXP, I can't install the OS on the SD card, because EMXP tells
> > > me I have to use the Plus OS. Is there another way to install the HD OS on
> > > the SD card?
> > >
> > > Thanks a lot!
> > >
> > > Matthieu
> > >
> > >  
> > >
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>