Emax

Sorry, but nothing changes :((( Maybe one of the chip is damaged?



________________________________
From: Ted Summers <djtbs1@...>
To: emax@yahoogroups.com
Sent: Friday, October 7, 2011 4:58 AM
Subject: Re: [emax] Re: problem with internal HD

You need to move that jumper over to JP6.

According to the website here:
http://www.4drives.com/DRIVESPECS/IBM/1478.txt

You have the jumper for termination actually on "DISABLE UNIT ATTENTION".
That is the wrong place to have that jumper.



On Oct 6, 2011, at 1:31 PM, Aivis Mamajevs wrote:

pictures have put under the Photo folder "Internal HD problem"

________________________________
From: Ted Summers <djtbs1@...>
To: emax@yahoogroups.com
Sent: Thursday, October 6, 2011 11:15 PM
Subject: Re: [emax] Re: problem with internal HD

pictures cannot be sent to the Emax group directly, you either have to
upload them to the files section or send them directly to a group member
email.

On Thu, Oct 6, 2011 at 12:30 PM, Aivis Mamajevs <pelecis@...> wrote:

> **
>
>
> pictures are not the best quality, but something that can already be seen.
>
>
> ________________________________
> From: Ted Summers <djtbs1@...>
> To: emax@yahoogroups.com
> Sent: Thursday, October 6, 2011 9:13 PM
>
> Subject: Re: [emax] Re: problem with internal HD
>
> I would need to have a pic or exact detail of the jumpers and the drive
> model to specifically verify you have the setting you expect.
>
> Regards,
> Ted
>
> On Thu, Oct 6, 2011 at 9:24 AM, Aivis Mamajevs <pelecis@...> wrote:
>
> > **
>
> >
> >
> > One jamper imposed on 1, and the other on the 5. This is IBM 540MB disc.
> >
> >
> > ________________________________
> > From: Ted Summers <djtbs1@...>
> > To: emax@yahoogroups.com
> > Sent: Thursday, October 6, 2011 7:00 PM
> >
> > Subject: Re: [emax] Re: problem with internal HD
> >
> > You are setting the physical jumpers on the drive to 1 and then booting
> > from
> > floppy and changing to ID 1 in the Emax2 menu, right?
> >
> > Because if you do one without doing both, then it will never work.
> >
> > On Thu, Oct 6, 2011 at 8:52 AM, Aivis Mamajevs <pelecis@...>
> wrote:
> >
> > > **
> >
> > >
> > >
> > > I tried all ways, set a scsi 0 and 1, but nothing changes,  Iomega jaz
> > disc
> > > and the floppy disc can be formatted, but HD not. What other options
> are?
> > >
> > > ________________________________
> > > From: Ted Summers <djtbs1@...>
> > > To: emax@yahoogroups.com
> > > Sent: Thursday, October 6, 2011 5:19 AM
> > > Subject: Re: [emax] Re: problem with internal HD
> > >
> > >
> > > That isn't entirely true.
> > > While it is correct that on Emax 2 the SCSI ID cannot be 0 for the HD,
> I
> > > have Emax 1 and Emax 2 BOTH with SD card media and it boots from them.
> > >
> > > If you have set the setting for SCSI ID in Emax 2 after booting once
> from
> > > floppy, from there you should be able to boot from that SCSI ID.
> > >
> > > The 5380 SCSI controller in Emax is not smart enough to really know
> that
> > a
> > > drive is a removable media or not, from my experience, or research.
> > >
> > > Regards,
> > > Ted
> > >
> > > On Oct 5, 2011, at 4:27 PM, jaumemod wrote:
> > >
> > > Dear folk, checking your SCSI ID , in EMAX SCSI 0 is reserved to
> floppy.
> > > Checking your default SCSI HD ID, must be 1 to 7.
> > >
> > > Put terminator jumper on HD if it is in the end of SCSI chain.
> > >
> > > In case you use a SCSI chain disconect other devices letting alone HD
> and
> > > tr y to format.
> > >
> > > Emax OS won't start from removable media HD.
> > >
> > > --- In emax@yahoogroups.com, "Aivis Mamajevs" <pelecis@...> wrote:
> > > >
> > > > Hi, what could be the fault? When I turn on the internal Quantum HD
> LCD
> > > read "not emax2 drive." Trying to format HD LCD read "scsi hardware
> > error".
> > > I tried to connect to other HD, but it is the same.
> > > > Help please!
> > > >
> > > > Regards,
> > > > Aivis
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > > ------------------------------------
> > >
> > >
> > > Emax and Emax II User's Group Website
> > >
> > > http://www.silveriafamily.comYahoo! Groups Links
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> > Emax and Emax II User's Group Website
> >
> > http://www.silveriafamily.comYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.comYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>  
>

[Non-text portions of this message have been removed]

------------------------------------

Emax and Emax II User's Group Website

http://www.silveriafamily.comYahoo! Groups Links

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

Emax and Emax II User's Group Website

http://www.silveriafamily.comYahoo! Groups Links



[Non-text portions of this message have been removed]