Emax

Maybe the drive is bad, maybe bad SCSI cable.

You also haven't told us step for step what you have done.

If JP6 is on and JP1 is on, did you then:
boot from floppy
set SCSI ID in Emax2 menu for ID1
try format HD

Without exact steps and key touch, we cannot know that you have done all the
proper steps.




On Fri, Oct 7, 2011 at 2:05 AM, Aivis Mamajevs <pelecis@...> wrote:

> **
>
>
> Sorry, but nothing changes :((( Maybe one of the chip is damaged?
>
>
> ________________________________
> From: Ted Summers <djtbs1@...>
> To: emax@yahoogroups.com
> Sent: Friday, October 7, 2011 4:58 AM
>
> Subject: Re: [emax] Re: problem with internal HD
>
> You need to move that jumper over to JP6.
>
> According to the website here:
> http://www.4drives.com/DRIVESPECS/IBM/1478.txt
>
> You have the jumper for termination actually on "DISABLE UNIT ATTENTION".
> That is the wrong place to have that jumper.
>
> On Oct 6, 2011, at 1:31 PM, Aivis Mamajevs wrote:
>
> pictures have put under the Photo folder "Internal HD problem"
>
> ________________________________
> From: Ted Summers <djtbs1@...>
> To: emax@yahoogroups.com
> Sent: Thursday, October 6, 2011 11:15 PM
> Subject: Re: [emax] Re: problem with internal HD
>
> pictures cannot be sent to the Emax group directly, you either have to
> upload them to the files section or send them directly to a group member
> email.
>
> On Thu, Oct 6, 2011 at 12:30 PM, Aivis Mamajevs <pelecis@...> wrote:
>
> > **
> >
> >
> > pictures are not the best quality, but something that can already be
> seen.
> >
> >
> > ________________________________
> > From: Ted Summers <djtbs1@gmail.com>
> > To: emax@yahoogroups.com
> > Sent: Thursday, October 6, 2011 9:13 PM
> >
> > Subject: Re: [emax] Re: problem with internal HD
> >
> > I would need to have a pic or exact detail of the jumpers and the drive
> > model to specifically verify you have the setting you expect.
> >
> > Regards,
> > Ted
> >
> > On Thu, Oct 6, 2011 at 9:24 AM, Aivis Mamajevs <pelecis@yahoo.com>
> wrote:
> >
> > > **
> >
> > >
> > >
> > > One jamper imposed on 1, and the other on the 5. This is IBM 540MB
> disc.
> > >
> > >
> > > ________________________________
> > > From: Ted Summers <djtbs1@...>
> > > To: emax@yahoogroups.com
> > > Sent: Thursday, October 6, 2011 7:00 PM
> > >
> > > Subject: Re: [emax] Re: problem with internal HD
> > >
> > > You are setting the physical jumpers on the drive to 1 and then booting
> > > from
> > > floppy and changing to ID 1 in the Emax2 menu, right?
> > >
> > > Because if you do one without doing both, then it will never work.
> > >
> > > On Thu, Oct 6, 2011 at 8:52 AM, Aivis Mamajevs <pelecis@...>
> > wrote:
> > >
> > > > **
> > >
> > > >
> > > >
> > > > I tried all ways, set a scsi 0 and 1, but nothing changes,  Iomega
> jaz
> > > disc
> > > > and the floppy disc can be formatted, but HD not. What other options
> > are?
> > > >
> > > > ________________________________
> > > > From: Ted Summers <djtbs1@...>
> > > > To: emax@yahoogroups.com
> > > > Sent: Thursday, October 6, 2011 5:19 AM
> > > > Subject: Re: [emax] Re: problem with internal HD
> > > >
> > > >
> > > > That isn't entirely true.
> > > > While it is correct that on Emax 2 the SCSI ID cannot be 0 for the
> HD,
> > I
> > > > have Emax 1 and Emax 2 BOTH with SD card media and it boots from
> them.
> > > >
> > > > If you have set the setting for SCSI ID in Emax 2 after booting once
> > from
> > > > floppy, from there you should be able to boot from that SCSI ID.
> > > >
> > > > The 5380 SCSI controller in Emax is not smart enough to really know
> > that
> > > a
> > > > drive is a removable media or not, from my experience, or research.
> > > >
> > > > Regards,
> > > > Ted
> > > >
> > > > On Oct 5, 2011, at 4:27 PM, jaumemod wrote:
> > > >
> > > > Dear folk, checking your SCSI ID , in EMAX SCSI 0 is reserved to
> > floppy.
> > > > Checking your default SCSI HD ID, must be 1 to 7.
> > > >
> > > > Put terminator jumper on HD if it is in the end of SCSI chain.
> > > >
> > > > In case you use a SCSI chain disconect other devices letting alone HD
> > and
> > > > tr y to format.
> > > >
> > > > Emax OS won't start from removable media HD.
> > > >
> > > > --- In emax@yahoogroups.com, "Aivis Mamajevs" <pelecis@...> wrote:
> > > > >
> > > > > Hi, what could be the fault? When I turn on the internal Quantum HD
> > LCD
> > > > read "not emax2 drive." Trying to format HD LCD read "scsi hardware
> > > error".
> > > > I tried to connect to other HD, but it is the same.
> > > > > Help please!
> > > > >
> > > > > Regards,
> > > > > Aivis
> > > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > > ------------------------------------
> > > >
> > > >
> > > > Emax and Emax II User's Group Website
> > > >
> > > > http://www.silveriafamily.comYahoo! Groups Links
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > > ------------------------------------
> > >
> > > Emax and Emax II User's Group Website
> > >
> > > http://www.silveriafamily.comYahoo! Groups Links
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> > Emax and Emax II User's Group Website
> >
> > http://www.silveriafamily.comYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.comYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.comYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]