Emax

no get a proper jm125a slim gfloppy adapter and do whats been told thats how its done why are you complicating things

do as the person how found out how it was done

ted spent lots of time on this and burnt out floppy controllers in doing so he created a working solution that works get with the program and do as instructed 
  ----- Original Message ----- 
  From: soundsubs 
  To: emax@yahoogroups.com 
  Sent: Tuesday, February 21, 2012 5:38 PM
  Subject: [emax] Re: Baldwin IKE CF addition mayhem


    
  >Perhaps IC54, IC5 and check RN1 resistor networks in regards to floppy.
  >>>For reference: 
  IC54 (Philips 74HCT14N) is not socketed
  IC5 (74SOON) is not socketed either
  RN1 (F221/331GA 10-pin Resistor Network) 
  No burn marks or anything physically wrong with them to the eye. 
  I suppose its possible that the drive is bad, as it clicks with "disk not formatted" even with a floppy removed from it. 

  The floppy ribbon cable-- which seems to be a 4N093-A01-- is just like this one: http://www.ebay.com/itm/DELL-5N051-GX150-GX240-GX260-GX270-CD-SFF-DRIVE-CABLE-CN-05N051-/380372017920?pt=LH_DefaultDomain_0&hash=item588ff06300

  Not sure it can be modified? 



  

[Non-text portions of this message have been removed]