Emax

Emax 1 uses SCSI ID 0 for the CF drive.
Emax 2 uses SCSI ID 1 or higher- did you change the jumper?

If not- that would be a reason why.


On Mon, Jun 4, 2012 at 12:50 PM, freddy1771994 <freddy1771994@...>wrote:

> **
>
>
> Hi,
>
> I bought an Emax 1 with cf card reader and slim floppy drive from group
> member jammie.emma which works fine. But in consideration of the fact that
> I have 5gb of emaxII (working with zip100 can be annoying then), but only a
> few hundred mbs of emaxI sounds (the internal ZIP I bought doesn't work
> eiter - but that's a different sory) I wanted to mount the cf card reader
> into the emaxII.
> I did so, but it doesn't work.
>
> It's easy to describe:
>
> 1) The emaxII simply does not see it or react on it, if the cable is right
> round on the pcb.
> 2) I hoped, "ok maybe it's the other way round than I used to have it
> installed when the harddrive was in." I did it and now all the lights were
> continously lit. After having it switched on and booting from the floppy
> the display completely refused any kind of work and it's turns black after
> the "Loading Software" message.
>
> No worries; I didn't mess it up. When I put it into the emax I angain it
> worked fine.
>
> Do you have any ideas where this problem might result from?
>
> Thank you very much!!!!
> Freddy
>
>  
>


[Non-text portions of this message have been removed]