Emax

Yes i already check the cables pin 1 is ok. My brother (digital electronics technician) insist that is a power issue, 'cos no spin on the floopy but we checked completely the psu and q2 on the board but the volts are ok, i am seriously thinkig my pal chips are dead, what do you think???

--- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
>
> You may also wish to reseat the IC's on the right half of the Emax logic board including the EPROM.
> My testbed for the SCSI kits does this as it gets flexed from many IC removal / replacement and so the seating of IC's isn't great.
> 
> Once I reseat everything I will get my display back and floppy whirring away- IT's ALIVE, ALIVE!!!!
> BWAHAHAHA!!!
> 
> Just a thought.
> The other option is to send it to jammie or me (depend on where you live). I doubt it is dead, you may just be looking at the wrong thing / area of the board.
> 
> or Jammie has some boards... I do believe.
> 
> Thx,
> Ted
> 
> 
> 
> 
> On Jun 10, 2012, at 2:12 AM, jammie wrote:
> 
> check the digital to audio board cable have you got it reversed
> ----- Original Message ----- 
> From: cheju_99 
> To: emax@yahoogroups.com 
> Sent: Sunday, June 10, 2012 3:50 AM
> Subject: [emax] black boxes No boot
> 
> After spending many dollars buying the technical manual, and the 6500 scan processor from eprelectronics, definitely with no success triying to start an emax 1- Right now got the unit with the display showing black boxes, a floppy drive who doesn´t spin, and definitely no boot. Any idea from the people´s forum????......hurry the trash truck is coming. 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>