Emax

broken floppy

this can also make the lcd screen crash

remove floppy drive idc cable and see if it comes up with the emu screen

it could be a number of chips but i would check the floppy disk controller

if your brother is a digital electronics technician then he can check the pulses with a logic anilyser and cross reference with the pdf for the pulse signals to see if he is getting correct signals

also have you got the cable the corect way on the floppy is it an original or a replacement as if its a replacement the floppy cable goes the oposit to the original version 

as you have to do that on all models due to the manufactureres setting the to pc standard and pin 1 is the oposit side
  ----- Original Message ----- 
  From: cheju_99 
  To: emax@yahoogroups.com 
  Sent: Sunday, June 10, 2012 6:58 PM
  Subject: [emax] Re: black boxes No boot


    
  Yes i already check the cables pin 1 is ok. My brother (digital electronics technician) insist that is a power issue, 'cos no spin on the floopy but we checked completely the psu and q2 on the board but the volts are ok, i am seriously thinkig my pal chips are dead, what do you think???

  --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
  >
  > You may also wish to reseat the IC's on the right half of the Emax logic board including the EPROM.
  > My testbed for the SCSI kits does this as it gets flexed from many IC removal / replacement and so the seating of IC's isn't great.
  > 
  > Once I reseat everything I will get my display back and floppy whirring away- IT's ALIVE, ALIVE!!!!
  > BWAHAHAHA!!!
  > 
  > Just a thought.
  > The other option is to send it to jammie or me (depend on where you live). I doubt it is dead, you may just be looking at the wrong thing / area of the board.
  > 
  > or Jammie has some boards... I do believe.
  > 
  > Thx,
  > Ted
  > 
  > 
  > 
  > 
  > On Jun 10, 2012, at 2:12 AM, jammie wrote:
  > 
  > check the digital to audio board cable have you got it reversed
  > ----- Original Message ----- 
  > From: cheju_99 
  > To: emax@yahoogroups.com 
  > Sent: Sunday, June 10, 2012 3:50 AM
  > Subject: [emax] black boxes No boot
  > 
  > After spending many dollars buying the technical manual, and the 6500 scan processor from eprelectronics, definitely with no success triying to start an emax 1- Right now got the unit with the display showing black boxes, a floppy drive who doesn´t spin, and definitely no boot. Any idea from the people´s forum????......hurry the trash truck is coming. 
  > 
  > [Non-text portions of this message have been removed]
  > 
  > 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  

[Non-text portions of this message have been removed]