Emax

Ok i already did that yesterday, disconect the floppy, power and data cable , still the same situation, unfortunately my brother is not in my area.



--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> broken floppy
> 
> this can also make the lcd screen crash
> 
> remove floppy drive idc cable and see if it comes up with the emu screen
> 
> it could be a number of chips but i would check the floppy disk controller
> 
> if your brother is a digital electronics technician then he can check the pulses with a logic anilyser and cross reference with the pdf for the pulse signals to see if he is getting correct signals
> 
> also have you got the cable the corect way on the floppy is it an original or a replacement as if its a replacement the floppy cable goes the oposit to the original version 
> 
> as you have to do that on all models due to the manufactureres setting the to pc standard and pin 1 is the oposit side
>   ----- Original Message ----- 
>   From: cheju_99 
>   To: emax@yahoogroups.com 
>   Sent: Sunday, June 10, 2012 6:58 PM
>   Subject: [emax] Re: black boxes No boot
> 
> 
>     
>   Yes i already check the cables pin 1 is ok. My brother (digital electronics technician) insist that is a power issue, 'cos no spin on the floopy but we checked completely the psu and q2 on the board but the volts are ok, i am seriously thinkig my pal chips are dead, what do you think???
> 
>   --- In emax@yahoogroups.com, Ted Summers <djtbs1@> wrote:
>   >
>   > You may also wish to reseat the IC's on the right half of the Emax logic board including the EPROM.
>   > My testbed for the SCSI kits does this as it gets flexed from many IC removal / replacement and so the seating of IC's isn't great.
>   > 
>   > Once I reseat everything I will get my display back and floppy whirring away- IT's ALIVE, ALIVE!!!!
>   > BWAHAHAHA!!!
>   > 
>   > Just a thought.
>   > The other option is to send it to jammie or me (depend on where you live). I doubt it is dead, you may just be looking at the wrong thing / area of the board.
>   > 
>   > or Jammie has some boards... I do believe.
>   > 
>   > Thx,
>   > Ted
>   > 
>   > 
>   > 
>   > 
>   > On Jun 10, 2012, at 2:12 AM, jammie wrote:
>   > 
>   > check the digital to audio board cable have you got it reversed
>   > ----- Original Message ----- 
>   > From: cheju_99 
>   > To: emax@yahoogroups.com 
>   > Sent: Sunday, June 10, 2012 3:50 AM
>   > Subject: [emax] black boxes No boot
>   > 
>   > After spending many dollars buying the technical manual, and the 6500 scan processor from eprelectronics, definitely with no success triying to start an emax 1- Right now got the unit with the display showing black boxes, a floppy drive who doesn´t spin, and definitely no boot. Any idea from the people´s forum????......hurry the trash truck is coming. 
>   > 
>   > [Non-text portions of this message have been removed]
>   > 
>   > 
>   > 
>   > 
>   > 
>   > [Non-text portions of this message have been removed]
>   >
> 
> 
> 
>   
> 
> [Non-text portions of this message have been removed]
>