Emax

(Off topic)  Your English is better than that of many Americans I've met
online.  heheheh.  Have a great day!

-Aaron

----- Original Message -----
From: <emax@yahoogroups.com>
To: <emax@yahoogroups.com>
Sent: Monday, April 26, 2004 5:13 AM
Subject: [emax] Digest Number 625



There is 1 message in this issue.

Topics in this digest:

      1. Re: Re: What's the problem with my Emax?
           From: Sylvain Dumortier <sdumor@...>


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Sun, 25 Apr 2004 14:39:47 +0200 (CEST)
   From: Sylvain Dumortier <sdumor@...>
Subject: Re: Re: What's the problem with my Emax?

Hi! I'm a french guy so please excuse me if my english
isn't so good as yours...
I had the same problem with my Emax but i'm sure that
the floppy is not responsible. What OS version do you
use and did you upgrade your Emax using Emaxutility? I
think i have the answer for this problem but my Emax
isn't near me and i need to have it to describe you
what would you have to do.
See you.






Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Cr\ufffdez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/

Dialoguez en direct avec vos amis gr\ufffdce \ufffd Yahoo! Messenger !T\ufffdl\ufffdchargez
Yahoo! Messenger sur http://fr.messenger.yahoo.com


________________________________________________________________________
________________________________________________________________________


Emax and Emax II User's Group Website

http://www.silveriafamily.com
------------------------------------------------------------------------
Yahoo! Groups Links




------------------------------------------------------------------------

Hello, thanks for responding

I have the latetest OS
 ( se.1.1 emax and HD se 1.1 for my emax HD)

I used the EMX utility program to copy banks to a
formated HD disk, i also tried a 720kb SD disk.

thanks for any help : )



--- emax@yahoogroups.com wrote:
> ------------------------ Yahoo! Groups Sponsor
> 
> There is 1 message in this issue.
> 
> Topics in this digest:
> 
>       1. Re: Re: What's the problem with my Emax?
>            From: Sylvain Dumortier <sdumor@...>
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 1
>    Date: Sun, 25 Apr 2004 14:39:47 +0200 (CEST)
>    From: Sylvain Dumortier <sdumor@...>
> Subject: Re: Re: What's the problem with my Emax?
> 
> Hi! I'm a french guy so please excuse me if my
> english
> isn't so good as yours...
> I had the same problem with my Emax but i'm sure
> that
> the floppy is not responsible. What OS version do
> you
> use and did you upgrade your Emax using Emaxutility?
> I
> think i have the answer for this problem but my Emax
> isn't near me and i need to have it to describe you
> what would you have to do.
> See you.
> 
> 
> 	
> 
> 	
> 		
> Yahoo! Mail : votre e-mail personnel et gratuit qui
> vous suit partout ! 
> Cr\ufffdez votre Yahoo! Mail sur
> http://fr.benefits.yahoo.com/
> 
> Dialoguez en direct avec vos amis gr\ufffdce \ufffd Yahoo!
> Messenger !T\ufffdl\ufffdchargez Yahoo! Messenger sur
> http://fr.messenger.yahoo.com
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com
>
------------------------------------------------------------------------
> Yahoo! Groups Links
> 
> 
>      emax-unsubscribe@yahoogroups.com
> 
>  
>
------------------------------------------------------------------------
> 
> 



	
		
__________________________________
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25\ufffd
http://photos.yahoo.com/ph/print_splash

OK for your Emax os version but did you upgrade it
using Emax utility? I must now it: the problem has
occured after using it for me.I will check my Emax
tonight to verify how to proceed. I'm a bit long to
answer because I don't have the web at home. For now,
i'm still an Atari ST addict..!

See you!


	

	
		
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout ! 
Cr\ufffdez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/

Dialoguez en direct avec vos amis gr\ufffdce \ufffd Yahoo! Messenger !T\ufffdl\ufffdchargez Yahoo! Messenger sur http://fr.messenger.yahoo.com

Hi.

I've been asking this one before, but now my exmax II is completely 
dead. I've got no sound output at all, no matter what patches I load. A 
month earlier the emax worked ok, and it has been standing in the studio 
since. Suddenly it just became quiet... Has anyone experienced this 
behaviour? What can possibly be wrong?

/jens

The only time my Emax II has ever gone silent is after I open it up. You have to make 
sure the ribbon connector to the output board is seated correctly, it typically comes 
loose when opening the unit.

On 27 Apr 2004 at 13:01, Jens Hellqvist wrote:

> Hi.
> 
> I've been asking this one before, but now my exmax II is completely 
> dead. I've got no sound output at all, no matter what patches I load. A 
> month earlier the emax worked ok, and it has been standing in the studio 
> since. Suddenly it just became quiet... Has anyone experienced this 
> behaviour? What can possibly be wrong?

-- 
                          John Silveria II
                   AIM & Yahoo! Messenger: EmaxJS
                        MSN: emaxjs@...
     The Silveria Family Website & Emax and Emax II User's Group
                    http://www.silveriafamily.com

Thanks Aaron. Maybe the community will help American
and French relationships? I hope so...
I'm a new member so I have to introduce myself to the
community:
I work at Radio France and I am, say, an electronic
engineer specialized in audio products. If someone
needs help...
I make an heavy use of my Emax, my E4XT Ultra, my
Wavestation, my Drumstation, my DW6000, ... using an
Atari ST with Cubase for sequencing and a Sadie
workstation for recording.
I think i will try Cubase on a PC soon.
See you!


	

	
		
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout ! 
Cr\ufffdez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/

Dialoguez en direct avec vos amis gr\ufffdce \ufffd Yahoo! Messenger !T\ufffdl\ufffdchargez Yahoo! Messenger sur http://fr.messenger.yahoo.com

Ok, thanks a lot for those two tips! I'll check theese things out as 
soon as I'll get to the studio.

/jens

Dr.-Ing. Christian Gritzner wrote:

> Hi,
> 
> I had a similar problem recently: my EmaxII didn't recognized the SCSI
> devices including the harddisk after switching it on first time after some
> weeks. It only accepted the floppy drive.
> I opened it and disconnected and reconnected the memory board but it was
> even worse: it couldn't load any sounds, because the memory was gone... "not
> enough memory available".
> My brother (who is a radio/TV engineer) told me to clean it!
> So, I took a vacuum cleaner, a small soft brush, and a hard brush and
> disconnected all the board and plugs (be careful to get them reconnected
> properly, maybe mark them with a pencil). Then I cleaned the connector pins
> with the hard brush and the electronic boards with the soft brush while
> taking away the dust with the vacuum cleaner simultaneously.
> 
> And now it works perfectly again!!!
> 
> You can try that, but be careful not to damage your Emax (e.g. to avoid
> damage to the electronics due to static discharge you should get grounded by
> touching metal parts of the Emax first before touching the boards, etc.).
> 
> Hope it will help!
> 
> Best wishes,
> Chris
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: Jens Hellqvist [mailto:jens@...]
> Gesendet: Dienstag, 27. April 2004 12:02
> An: emax@yahoogroups.com
> Betreff: [emax] No sound on emax II
> 
> 
> Hi.
> 
> I've been asking this one before, but now my exmax II is completely
> dead. I've got no sound output at all, no matter what patches I load. A
> month earlier the emax worked ok, and it has been standing in the studio
> since. Suddenly it just became quiet... Has anyone experienced this
> behaviour? What can possibly be wrong?
> 
> /jens
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com
> 
> 
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> 
> < /td>
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/emax/
> 
> To unsubscribe from this group, send an email to:
> emax-unsubscribe@yahoogroups.com
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> 
> 
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>

Hi,

I had a similar problem recently: my EmaxII didn't recognized the SCSI
devices including the harddisk after switching it on first time after some
weeks. It only accepted the floppy drive.
I opened it and disconnected and reconnected the memory board but it was
even worse: it couldn't load any sounds, because the memory was gone... "not
enough memory available".
My brother (who is a radio/TV engineer) told me to clean it!
So, I took a vacuum cleaner, a small soft brush, and a hard brush and
disconnected all the board and plugs (be careful to get them reconnected
properly, maybe mark them with a pencil). Then I cleaned the connector pins
with the hard brush and the electronic boards with the soft brush while
taking away the dust with the vacuum cleaner simultaneously.

And now it works perfectly again!!!

You can try that, but be careful not to damage your Emax (e.g. to avoid
damage to the electronics due to static discharge you should get grounded by
touching metal parts of the Emax first before touching the boards, etc.).

Hope it will help!

Best wishes,
Chris


-----Urspr\ufffdngliche Nachricht-----
Von: Jens Hellqvist [mailto:jens@...]
Gesendet: Dienstag, 27. April 2004 12:02
An: emax@yahoogroups.com
Betreff: [emax] No sound on emax II


Hi.

I've been asking this one before, but now my exmax II is completely
dead. I've got no sound output at all, no matter what patches I load. A
month earlier the emax worked ok, and it has been standing in the studio
since. Suddenly it just became quiet... Has anyone experienced this
behaviour? What can possibly be wrong?

/jens


Emax and Emax II User's Group Website

http://www.silveriafamily.com


Yahoo! Groups Sponsor
ADVERTISEMENT

< /td>




Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/emax/

To unsubscribe from this group, send an email to:
emax-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

I know this is off the Emax subject, but a few people
have mentioned Atari ST.

I have an FTP site for Atari ST/Falcon/Portfolio (some
older Mac and PC stuff too) at: 

ftp://67.122.78.102

There's a Web page too at: 

http://www.sinasohn.com/abacus/

but it seems to be down right now (I'll have to email
the guy hosting it).

Yours,

Bob

--- Sylvain Dumortier <sdumor@...> wrote:
> OK for your Emax os version but did you upgrade it
> using Emax utility? I must now it: the problem has
> occured after using it for me.I will check my Emax
> tonight to verify how to proceed. I'm a bit long to
> answer because I don't have the web at home. For
> now,
> i'm still an Atari ST addict..!
> 
> See you!
> 
> 
> 	
> 
> 	
> 		
> Yahoo! Mail : votre e-mail personnel et gratuit qui
> vous suit partout ! 
> Cr\ufffdez votre Yahoo! Mail sur
> http://fr.benefits.yahoo.com/
> 
> Dialoguez en direct avec vos amis gr\ufffdce \ufffd Yahoo!
> Messenger !T\ufffdl\ufffdchargez Yahoo! Messenger sur
> http://fr.messenger.yahoo.com
> 



	
		
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs  
http://hotjobs.sweepstakes.yahoo.com/careermakeover