Backlight for E-II ?
2010-09-08 by Gil
I m having hard times trying to figure out what s written on this small display. I recall someone placing a blue backlight for its display... any reference for
Messages
Browse messages
Page 15 of 48 · 2353 messages matched
Update - Re: Advice request - Intermittment channel error
2010-09-07 by ajwills1972
So, I was doing the IC reseating last night, and discovered that IC97 on the output board had pin 8 bent out and hence missing the IC socket. Not something I
Re: Advice request - Intermittment channel error
2010-09-06 by ajwills1972
Many thanks to everyone who replied. I will try the re-seating first, then the SSM swap-over if that doesn t work. The advice on rebuilding is also much
Re: [emulatorII-list] Advice request - Intermittment channel error
2010-09-06 by Mike de Vries
Open it up, and using a small flat head screwdriver, pry up each IC gently a few millimetres away from the IC holder, then press it down. (This is called
Re: Advice request - Intermittment channel error
2010-09-06 by Mike
Unfortunately, there is no magic bullet to fixing your problem. Synths of this vintage have several components inside them that are well beyond their expected
Re: [emulatorII-list] Advice request - Intermittment channel error
2010-09-06 by WT
I would suggest that you swap the SSM with a another SSM from a working channel and do some testing again. If channel 4 continues to have the same problem,
Advice request - Intermittment channel error
2010-09-06 by ajwills1972
Hi, I have an Emulator II+ with an intermittment error on Channel 4. When the error occurs, you can play 7 notes in a row, the 8th note you play doesn t sound,
Re: [emulatorII-list] Re: Wanted: EII front panel label
2010-08-29 by James Ulibarri
Elm, I will get an FTP account sorted in the next couple days so you can upload them there. Thank you Elm!! James
Re: Wanted: EII front panel label
2010-08-28 by elmbeatz
Yes, I can. On monday. Have you got some kind of account where to upload to? The scans have 300 dpi in resolution, so they re quite big. Best, Elm.
Re: Wanted: EII front panel label
2010-08-25 by jamesulibarri
Elm, Can you upload some scans? Thanks!
Hi
2010-08-19 by dd_62622
hallo Emulators, I recently picked up a DPX1 rev2.2 after looking for one for quite some time. I remeber reading about it s ability to read the EII format and
Re: USB/RS422 device news
2010-08-17 by esynthesist
OK, I understand your point. The EmuComBox USB/RS422 device is aimed to be compatible with the normal RS422 interface of the EII, so an EII RS422 board that
Re: [emulatorII-list] Re: USB/RS422 device news
2010-08-17 by Mike Borish
I was wondering if the RS422 board needed to be altered in any way to work with the RS422/USB converter. If I have to make an RS422 board to talk to a Mac,
Re: USB/RS422 device news
2010-08-16 by esynthesist
I m not sure if I understand you correctly here. If you are asking whether the USB/RS422 is reverse compatible in order to use it with a vintage Mac... why
Re: [emulatorII-list] Re: USB/RS422 device news
2010-08-16 by Mike Borish
Is this RS422 thing reverse compatible? Can I still get all of the benefits of SDII on a vintage Mac with this RS422 thing you re working on? Right now, I d
Re: USB/RS422 device news
2010-08-16 by esynthesist
The specs have been released a few months ago. You can find them here: http://users.skynet.be/emxp/EMUCOMBOX.htm So far these kits are not for sale - they are
Re: [emulatorII-list] Re: USB/RS422 device news
2010-08-15 by Mike Borish
What is the status of this USB/RS422 kit? Are they available for sale? Is this the end all to the EII working in tandem (Storage/Load/etc. ) with windows 7?
Emulator storage advice
2010-08-14 by greg thurman
I am hoping someone can give me some advise on a storage situation I m in. I have some Emulators, Fairlight IIx, III, ppg s, Dx1, Synclavier, Pro tools/Mac,
Re: [emulatorII-list] Re: SD Card instead of floppy
2010-07-28 by James Ulibarri
Nah, I ll keep throwing my opinion out there any damn time I please. Thank you very much. The sd format seems smart now that you put it that way actually.
Re: [emulatorII-list] Re: SD Card instead of floppy
2010-07-28 by Mike de Vries
Thats a bit of a generalization. email s like that make you sound like a tosser. I want a SD card in my EII.. and I use my EII to make music. I don t want
Re: [emulatorII-list] Re: SD Card instead of floppy
2010-07-28 by James Ulibarri
yeah I hear ya. Hat s off to the guys who actually figure it out. I just sit in the corner and bitch! I ve had 4 of these things in the last 2.5 years and
Re: [emulatorII-list] Re: SD Card instead of floppy
2010-07-28 by WT
....vut when it works it´s a joy to use. I hotrodded my Atari 1040 with an Ultrasatan SD-card reader and got rid of the painfully noisy old Megafile 30
Re: Wanted: EII front panel label
2010-07-27 by jamesulibarri
Yeah of course. I have a printer ready for them with a laser plotter waiting on you!! :)
Re: SD Card instead of floppy
2010-07-27 by jamesulibarri
what a waste of time. Just use the damn floppies already. You guys waste more time trying to hot rod your emulator II verses make any tunes with it. Get over
Re: SD Card instead of floppy
2010-07-26 by andrei.kudryavtsev
Smartprog - that s too expensive for so simple task. I have Beeprog from elnec but for home use the best for money is Willem:
Re: [emulatorII-list] Re: SD Card instead of floppy
2010-07-24 by WT
Elnec Smartprog2 or similar model. www.elnec.com WT ... From: ditabeardmemo To: Sent: Saturday,
Re: SD Card instead of floppy
2010-07-24 by ditabeardmemo
Sorry for the off-topic post, but... I have a collection of nine EPROM sound libraries for the E-Mu Drumulator. I bought them on eBay earlier this year along
LCD ribbon cable replacement.
2010-07-20 by Gino
I need to replace the thin ribbon cable that connects the LCD display to the panel board. Any would have any advice on what to use? Thanks
Re: SD Card instead of floppy
2010-07-16 by Jeremy Campbell
Ah, unfortunately I don t have any way to get the binaries off of them for you or I would! Perhaps it would be worth contacting one of these guys?
Re: SD Card instead of floppy
2010-07-15 by andrei.kudryavtsev
Thank you for response, Jeremy. Basically I m looking only for eprom binaries I can burn it by myself. And I m ready to pay but paying for full eprom kit is
Re: SD Card instead of floppy
2010-07-15 by andrei.kudryavtsev
Hi Hex, It doesn t look well onside but it works well - the breadboard is full of wires ))))) here is few photos before I put all together to 5.25 case.
Re: SD Card instead of floppy
2010-07-14 by Jeremy Campbell
Andrei, I have seen the digidrums on ebay not too long ago. I would keep a saved search and you will probably find some with patience. I have a couple (african
Re: Wanted: EII front panel label
2010-07-13 by elmbeatz
Of course james! But - I have a lot of work at the moment... so I haven t had the time to convert the scans.. I could provide the High-Res Scans, if there s
Re: SD Card instead of floppy
2010-07-13 by hexafuzz
... OK thanks Andrei. I wasnt sure if those were different disk images or presets within a bank during the video. This is a great mod for the DPX-1. :) If you
Re: SD Card instead of floppy
2010-07-13 by andrei.kudryavtsev
Hi Esynthesist, 1. It s the emulation of DPX1 floppy not EII. so that means I converted all E2 images to DPX format by your utility first ))) 2. I know they
Re: SD Card instead of floppy
2010-07-13 by andrei.kudryavtsev
Hi Hex, Multiple!!! AS MUCH AS you wish!!!! ))))) http://hxc2001.free.fr/floppy_drive_emulator/ SD card formatted in FAT32, so, you just copy files you need
Re: SD Card instead of floppy
2010-07-13 by andrei.kudryavtsev
look here, this is creator of this project: http://hxc2001.free.fr/floppy_drive_emulator/ You can buy directly from him. 60 pounds as I remember. I do NOT make
Re: Wanted: EII front panel label
2010-07-12 by jamesulibarri
Elm, Are you going to release your files to us eventually? Thanks, James
Re: SD Card instead of floppy
2010-07-12 by esynthesist
There is an interesting piece of information on the HXC website which took my attention with respect to the SD card version of the emulator: (...) Track mode
Re: SD Card instead of floppy
2010-07-12 by hexafuzz
... Hi Andrei, Will it be possible to store and retrieve multiple EII images from one SD memory card, or is this limited to just one EII image per SD memory
Re: SD Card instead of floppy
2010-07-12 by esynthesist
Wow, that s great. You finished that project quite fast ! I m wondering: you replaced the 5.25 EII drive on your DPX. But as far as I understand the HxC
Re: SD Card instead of floppy
2010-07-12 by elmbeatz
YES YES YES YES !!! ! ! ! ! ! This rocks man! THIS ROCKS! do you build these readers?
SD Card instead of floppy
2010-07-12 by andrei.kudryavtsev
Hi EII community! I think some of you who have DPX-1 and subscribed for dpx1 group have seen my post there. For others I show this video:
Re: Wanted: EII front panel label
2010-06-30 by jamesulibarri
Cool. I believe I have traded my EII. It s the 3rd one I have owned and I can never get them to work right. I m over it.
Re: Wanted: EII front panel label
2010-06-28 by andrei.kudryavtsev
Hi Elm, Thank you for your efforts for doing this. I m also intersted in getting this layout in Corel or any other vector format. Andrei.
Re: Wanted: EII front panel label
2010-06-26 by elmbeatz
Well, actually I neither REALLY believe that story of my EII shell. BUT, as the seller absolutely had no idea of my DM passion at that time, I just found it
Re: Wanted: EII front panel label
2010-06-25 by jamesulibarri
No, bro. I am just playing with you. I don t know Alan personally. But it s an unlikely story about your case being owned by Alan Wilder. :] God s honest
Re: Wanted: EII front panel label
2010-06-25 by elmbeatz
You know, Depeche would have been a completely different band if Alan had stayed... Yes, absolutely! I totally lost interest in their music since he left.
Re: Wanted: EII front panel label
2010-06-24 by jamesulibarri
Elm, I just called Alan on the phone a couple hours ago and he said the two EII s he had (one purchased by Daniel Miller) are still with him. He gave one to
Re: [emulatorII-list] Re: Wanted: EII front panel label
2010-06-24 by Cristea Eusebiu
Ok, Elm, I took it wrong, then I appologise. M. ... From: elmbeatz Subject: [emulatorII-list] Re: Wanted: EII front panel label To: