Re: QUestion froma a new comer (Miroslav)
2004-04-01 by Nick Batzdorf
From: Gipo <gipo@...> >Just a question from a new user of EXS. >I know that is possible to load a sample in each channels in the exs. >But is it possible to change the sound/sample/channel from a note to >another?. If i want to play in the same track the first two notes with a >violin pizzicato and the others with a violin short? >How can i do without duplicate the track and using two different audio >instruments? > > I use Miroslav Vitous Samples... >> Is possible what you say with it? > > thansk > >Details about Garritan Key Switching cut. > >I don't know that library. Perhaps someone else can comment. It doesn't matter what libraries you're using. There's absolutely nothing to building keyswitches in EXS. Here's how you do it. 1. Open the EXS24 Instrument Editor (under the Audio menu) and create a new instrument. Save this as, say, Vlns short/pizz kyswtch. 2. Create a new group (option/command G, or New Group under the Group menu) 3. Load the pizz and short vln, and click on the Edit buttons in both EXSs (upper right corner) to open both their edit windows. 4. Go to the pizz vlns edit window, select all, and copy. 5. Paste everything into your Vlns short/pizz kyswtch edit window. 6. Where it says Select By in the little Group panel, choose Note and specify which note you want to use to call up pizz vlns. 7. Create a new group for the short vlns, copy and paste them in, and select a different keyswitch note for them. Save. You can build larger keyswitches if you want - just keep going. If you want to set up two groups of keyswitches in one Uberprogram, say one set with the mod wheel up and another one with it down, add a second condition in step #6. A new box is created automatically when you tell it to select by Note, so you could specify cc#1 (mod wheel) between 0 - 64 for one set of keyswitches and 65 - 127 for another. -- Nick Batzdorf 818/905-9101, cell 590-9101, fax 905-5434