Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Hi,
Ok lets not get mislead here.I hope you understand the algorithm 
structure of the GSP2101.Whatever is in the factory algorith you cant 
change them but you can edit such as deleting a certain parameter or 
adding a parameter thus it becomes a user algorithm.(i believe 
so,correct me if i'm wrong)
As for me footswitch 1 - 5 are used to change programs, 6 - 0 are 
used to turn on/off parameters of each programs.In order to do this 
you have to go to Utility and select #2(Foot Controller) then selct #1
(Patch Assignment).Select #2(Foot Switch) and scroll till 6.Then 
select #3 and scroll till you see "Foot Switch 6".Repeat the same 
process for 7 - 10.After this is done you areready to assign a 
parameter to the footswitch.
Let pick a familiar program example that is easy to identify.Lets say 
program "Lead On Me".It is using algoritm #9 which has SCho>4x2 
Stereo Mixer>Stereo Dly2.0>4X2 Stereo Mixer>2x1Mono Mixer>MFX 
Reverb>4x2 Stereo Mixer.
In that program let say you want to the Dist, SCho, Stereo Dly and 
MFX Reverb to have Footswitch so that you can turn on/off.from the 
screen press Dist button and then press "LINK" and release.The screen 
will prompt you to select a Footswitch, lets say you depress 6.It 
will automatically link the FS 6 to your Dist.Once done just select 
the prev button.Repeat for the SCho, Stereo Dly and MFX Reverb to FS 
7 - 9.
That should do it.I hope i explain my self clear here and it answers 
your doubt.Cheers and good luck.


--- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@...> wrote:
>
> I have the Digitech gsp2101 fc pedal..So let me clearify.Lets say I 
am using program #35 grunge to the max.You are saying  I can link 
foot control button 5 to tuen on the  harmonizer to add to the 
already running program then click it off with changing the running 
program.same as with chorus/flange/phaser etc;? 
> 
> belphedeus <belphedeus@...> wrote:                                  
Answer to your question is yes.Use the LINK button to set it to the 
>  desired footswitch of the particular program.What kinda foot 
>  controller are you using?
>  I'm relatively new to the GSP but i just linked footswitch 6 - 0 
of 
>  my Control one to the parameters(effects) so that i can turn it 
>  on/off a couple of weeks ago.
>  
>  --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@> wrote:
>  >
>  > Very nice. I am rather very new to the gsp2101.I stopped playin 
14 
>  years ago.About 6 months ago.I started up again.and purchased the 
gsp 
>  off ebay.So i am still learning it's pro and cons.
>  > Question. Can a button on the footswitch be programmed to an 
>  effect. to add to the program you are running as an on and off?
>  > 
>  > MM <strategy400@> 
>  wrote:                                           
>  >   2 Identical chrome face ver. 2.06.06 w/ ppc 
>  >    
>  >     -----Original Message-----
>  >  From: gsp-2101@yahoogroups.com [mailto:gsp-
2101@yahoogroups.com] 
>  On Behalf Of dunkin_donut3
>  >  Sent: Thursday, April 19, 2007 11:19 PM
>  >  To: gsp-2101@yahoogroups.com
>  >  Subject: [gsp-2101] How many do you own?
>  >    
>  >         2101?
>  >  
>  >  I'm at 4, D'oh!
>  >   
>  >   
>  > 
>  >       
>  > 
>  > 
>  > 
>  >      
>  >                        
>  > 
>  >        
>  > ---------------------------------
>  > Ahhh...imagining that irresistible "new car" smell?
>  >  Check outnew cars at Yahoo! Autos.
>  >
>  
>  
>      
>                        
> 
>        
> ---------------------------------
> Ahhh...imagining that irresistible "new car" smell?
>  Check outnew cars at Yahoo! Autos.
>