How many do you own?
2007-04-20 by dunkin_donut3
2101? I'm at 4, D'oh!
Thread
How many do you own?
Re: [gsp-2101] How many do you own?
2007-04-20 by matt adams
If your asking me how many gsp's I own,I have only 1 but several different amps
dunkin_donut3 wrote:
dunkin_donut3 wrote:
Show quoted textHide quoted text
2101?
I'm at 4, D'oh!
Ahhh...imagining that irresistible "new car" smell?
Check out
new cars at Yahoo! Autos.
RE: [gsp-2101] How many do you own?
2007-04-20 by MM
2 Identical chrome face ver. 2.06.06 w/ ppc ... From: gsp-2101@yahoogroups.com [mailto:gsp-2101@yahoogroups.com] On Behalf Of dunkin_donut3 Sent: Thursday,
RE: [gsp-2101] How many do you own?
2007-04-20 by matt adams
Very nice. I am rather very new to the gsp2101.I stopped playin 14 years ago.About 6 months ago.I started up again.and purchased the gsp off ebay.So i am still learning it's pro and cons.
Question. Can a button on the footswitch be programmed to an effect. to add to the program you are running as an on and off?
MM wrote:
Question. Can a button on the footswitch be programmed to an effect. to add to the program you are running as an on and off?
MM wrote:
Show quoted textHide quoted text
2 Identical chrome face ver. 2.06.06 w/ ppc-----Original Message-----
From: gsp-2101@yahoogroups.com [mailto:gsp-2101@yahoogroups.com] On Behalf Of dunkin_donut3
Sent: Thursday, April 19, 2007 11:19 PM
To: gsp-2101@yahoogroups.com
Subject: [gsp-2101] How many do you own?2101?
I'm at 4, D'oh!
Ahhh...imagining that irresistible "new car" smell?
Check out
new cars at Yahoo! Autos.
Re: How many do you own?
2007-04-20 by belphedeus
Answer to your question is yes.Use the LINK button to set it to the desired footswitch of the particular program.What kinda foot controller are you using? I'm relatively new to the GSP but i just linked footswitch 6 - 0 of my Control one to the parameters(effects) so that i can turn it on/off a couple of weeks ago. --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@...> wrote: > > Very nice. I am rather very new to the gsp2101.I stopped playin 14 years ago.About 6 months ago.I started up again.and purchased the gsp off ebay.So i am still learning it's pro and cons. > Question. Can a button on the footswitch be programmed to an effect. to add to the program you are running as an on and off? > > MM <strategy400@...> wrote: > 2 Identical chrome face ver. 2.06.06 w/ ppc > > -----Original Message----- > From: gsp-2101@yahoogroups.com [mailto:gsp-2101@yahoogroups.com] On Behalf Of dunkin_donut3
Show quoted textHide quoted text
> Sent: Thursday, April 19, 2007 11:19 PM > To: gsp-2101@yahoogroups.com > Subject: [gsp-2101] How many do you own? > > 2101? > > I'm at 4, D'oh! > > > > > > > > > > > > --------------------------------- > Ahhh...imagining that irresistible "new car" smell? > Check outnew cars at Yahoo! Autos. >
Re: [gsp-2101] Re: How many do you own?
2007-04-20 by matt adams
I have the Digitech gsp2101 fc pedal..So let me clearify.Lets say I am using program #35 grunge to the max.You are saying I can link foot control button 5 to tuen on the harmonizer to add to the already running program then click it off with changing the running program.same as with chorus/flange/phaser etc;?
belphedeus wrote:
belphedeus wrote:
Show quoted textHide quoted text
Answer to your question is yes.Use the LINK button to set it to the
desired footswitch of the particular program.What kinda foot
controller are you using?
I'm relatively new to the GSP but i just linked footswitch 6 - 0 of
my Control one to the parameters(effects) so that i can turn it
on/off a couple of weeks ago.
--- In gsp-2101@yahoogroups.com, matt adams ...> wrote:
>
> Very nice. I am rather very new to the gsp2101.I stopped playin 14
years ago.About 6 months ago.I started up again.and purchased the gsp
off ebay.So i am still learning it's pro and cons.
> Question. Can a button on the footswitch be programmed to an
effect. to add to the program you are running as an on and off?
>
> MM ...>
wrote:
> 2 Identical chrome face ver. 2.06.06 w/ ppc
>
> -----Original Message-----
> From: gsp-2101@yahoogroups.com [mailto:gsp-2101@yahoogroups.com]
On Behalf Of dunkin_donut3
> Sent: Thursday, April 19, 2007 11:19 PM
> To: gsp-2101@yahoogroups.com
> Subject: [gsp-2101] How many do you own?
>
> 2101?
>
> I'm at 4, D'oh!
>
>
>
>
>
>
>
>
>
>
>
> ---------------------------------
> Ahhh...imagining that irresistible "new car" smell?
> Check outnew cars at Yahoo! Autos.
>
Ahhh...imagining that irresistible "new car" smell?
Check out
new cars at Yahoo! Autos.
Re: How many do you own?
2007-04-21 by belphedeus
Hi, Ok lets not get mislead here.I hope you understand the algorithm structure of the GSP2101.Whatever is in the factory algorith you cant change them but you can edit such as deleting a certain parameter or adding a parameter thus it becomes a user algorithm.(i believe so,correct me if i'm wrong) As for me footswitch 1 - 5 are used to change programs, 6 - 0 are used to turn on/off parameters of each programs.In order to do this you have to go to Utility and select #2(Foot Controller) then selct #1 (Patch Assignment).Select #2(Foot Switch) and scroll till 6.Then select #3 and scroll till you see "Foot Switch 6".Repeat the same process for 7 - 10.After this is done you areready to assign a parameter to the footswitch. Let pick a familiar program example that is easy to identify.Lets say program "Lead On Me".It is using algoritm #9 which has SCho>4x2 Stereo Mixer>Stereo Dly2.0>4X2 Stereo Mixer>2x1Mono Mixer>MFX Reverb>4x2 Stereo Mixer. In that program let say you want to the Dist, SCho, Stereo Dly and MFX Reverb to have Footswitch so that you can turn on/off.from the screen press Dist button and then press "LINK" and release.The screen will prompt you to select a Footswitch, lets say you depress 6.It will automatically link the FS 6 to your Dist.Once done just select the prev button.Repeat for the SCho, Stereo Dly and MFX Reverb to FS 7 - 9. That should do it.I hope i explain my self clear here and it answers your doubt.Cheers and good luck. --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@...> wrote: > > I have the Digitech gsp2101 fc pedal..So let me clearify.Lets say I am using program #35 grunge to the max.You are saying I can link foot control button 5 to tuen on the harmonizer to add to the already running program then click it off with changing the running program.same as with chorus/flange/phaser etc;? > > belphedeus <belphedeus@...> wrote: Answer to your question is yes.Use the LINK button to set it to the > desired footswitch of the particular program.What kinda foot > controller are you using? > I'm relatively new to the GSP but i just linked footswitch 6 - 0 of > my Control one to the parameters(effects) so that i can turn it > on/off a couple of weeks ago. > > --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@> wrote: > > > > Very nice. I am rather very new to the gsp2101.I stopped playin 14 > years ago.About 6 months ago.I started up again.and purchased the gsp > off ebay.So i am still learning it's pro and cons. > > Question. Can a button on the footswitch be programmed to an > effect. to add to the program you are running as an on and off? > > > > MM <strategy400@> > wrote: > > 2 Identical chrome face ver. 2.06.06 w/ ppc > > > > -----Original Message----- > > From: gsp-2101@yahoogroups.com [mailto:gsp- 2101@yahoogroups.com]
Show quoted textHide quoted text
> On Behalf Of dunkin_donut3 > > Sent: Thursday, April 19, 2007 11:19 PM > > To: gsp-2101@yahoogroups.com > > Subject: [gsp-2101] How many do you own? > > > > 2101? > > > > I'm at 4, D'oh! > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------- > > Ahhh...imagining that irresistible "new car" smell? > > Check outnew cars at Yahoo! Autos. > > > > > > > > > --------------------------------- > Ahhh...imagining that irresistible "new car" smell? > Check outnew cars at Yahoo! Autos. >
Re: [gsp-2101] Re: How many do you own?
2007-04-21 by matt adams
I think you did.I still have to play around with it more.but from what you said I believe I understand enough.to make it happen..thank you!
belphedeus wrote:
belphedeus wrote:
Show quoted textHide quoted text
Hi,
Ok lets not get mislead here.I hope you understand the algorithm
structure of the GSP2101.Whatever is in the factory algorith you cant
change them but you can edit such as deleting a certain parameter or
adding a parameter thus it becomes a user algorithm.(i believe
so,correct me if i'm wrong)
As for me footswitch 1 - 5 are used to change programs, 6 - 0 are
used to turn on/off parameters of each programs.In order to do this
you have to go to Utility and select #2(Foot Controller) then selct #1
(Patch Assignment).Select #2(Foot Switch) and scroll till 6.Then
select #3 and scroll till you see "Foot Switch 6".Repeat the same
process for 7 - 10.After this is done you areready to assign a
parameter to the footswitch.
Let pick a familiar program example that is easy to identify.Lets say
program "Lead On Me".It is using algoritm #9 which has SCho>4x2
Stereo Mixer>Stereo Dly2.0>4X2 Stereo Mixer>2x1Mono Mixer>MFX
Reverb>4x2 Stereo Mixer.
In that program let say you want to the Dist, SCho, Stereo Dly and
MFX Reverb to have Footswitch so that you can turn on/off.from the
screen press Dist button and then press "LINK" and release.The screen
will prompt you to select a Footswitch, lets say you depress 6.It
will automatically link the FS 6 to your Dist.Once done just select
the prev button.Repeat for the SCho, Stereo Dly and MFX Reverb to FS
7 - 9.
That should do it.I hope i explain my self clear here and it answers
your doubt.Cheers and good luck.
--- In gsp-2101@yahoogroups.com, matt adams ...> wrote:
>
> I have the Digitech gsp2101 fc pedal..So let me clearify.Lets say I
am using program #35 grunge to the max.You are saying I can link
foot control button 5 to tuen on the harmonizer to add to the
already running program then click it off with changing the running
program.same as with chorus/flange/phaser etc;?
>
> belphedeus ...> wrote:
Answer to your question is yes.Use the LINK button to set it to the
> desired footswitch of the particular program.What kinda foot
> controller are you using?
> I'm relatively new to the GSP but i just linked footswitch 6 - 0
of
> my Control one to the parameters(effects) so that i can turn it
> on/off a couple of weeks ago.
>
> --- In gsp-2101@yahoogroups.com, matt adams > wrote:
> >
> > Very nice. I am rather very new to the gsp2101.I stopped playin
14
> years ago.About 6 months ago.I started up again.and purchased the
gsp
> off ebay.So i am still learning it's pro and cons.
> > Question. Can a button on the footswitch be programmed to an
> effect. to add to the program you are running as an on and off?
> >
> > MM >
> wrote:
> > 2 Identical chrome face ver. 2.06.06 w/ ppc
> >
> > -----Original Message-----
> > From: gsp-2101@yahoogroups.com [mailto:gsp-
2101@yahoogroups.com]
> On Behalf Of dunkin_donut3
> > Sent: Thursday, April 19, 2007 11:19 PM
> > To: gsp-2101@yahoogroups.com
> > Subject: [gsp-2101] How many do you own?
> >
> > 2101?
> >
> > I'm at 4, D'oh!
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > Ahhh...imagining that irresistible "new car" smell?
> > Check outnew cars at Yahoo! Autos.
> >
>
>
>
>
>
>
> ---------------------------------
> Ahhh...imagining that irresistible "new car" smell?
> Check outnew cars at Yahoo! Autos.
>
Ahhh...imagining that irresistible "new car" smell?
Check out
new cars at Yahoo! Autos.
Ahhh...imagining that irresistible "new car" smell?
Check out
new cars at Yahoo! Autos.
Re: How many do you own?
2007-04-22 by dunkin_donut3
Talk about getting away from the question
Re: How many do you own?
2007-04-22 by belphedeus
No problem...Cheers!! --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@...> wrote: > > I think you did.I still have to play around with it more.but from what you said I believe I understand enough.to make it happen..thank you! > > belphedeus <belphedeus@...> wrote: Hi, > Ok lets not get mislead here.I hope you understand the algorithm > structure of the GSP2101.Whatever is in the factory algorith you cant > change them but you can edit such as deleting a certain parameter or > adding a parameter thus it becomes a user algorithm.(i believe > so,correct me if i'm wrong) > As for me footswitch 1 - 5 are used to change programs, 6 - 0 are > used to turn on/off parameters of each programs.In order to do this > you have to go to Utility and select #2(Foot Controller) then selct #1 > (Patch Assignment).Select #2(Foot Switch) and scroll till 6.Then > select #3 and scroll till you see "Foot Switch 6".Repeat the same > process for 7 - 10.After this is done you areready to assign a > parameter to the footswitch. > Let pick a familiar program example that is easy to identify.Lets say > program "Lead On Me".It is using algoritm #9 which has SCho>4x2 > Stereo Mixer>Stereo Dly2.0>4X2 Stereo Mixer>2x1Mono Mixer>MFX > Reverb>4x2 Stereo Mixer. > In that program let say you want to the Dist, SCho, Stereo Dly and > MFX Reverb to have Footswitch so that you can turn on/off.from the > screen press Dist button and then press "LINK" and release.The screen > will prompt you to select a Footswitch, lets say you depress 6.It > will automatically link the FS 6 to your Dist.Once done just select > the prev button.Repeat for the SCho, Stereo Dly and MFX Reverb to FS > 7 - 9. > That should do it.I hope i explain my self clear here and it answers > your doubt.Cheers and good luck. > > --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@> wrote: > > > > I have the Digitech gsp2101 fc pedal..So let me clearify.Lets say I > am using program #35 grunge to the max.You are saying I can link > foot control button 5 to tuen on the harmonizer to add to the > already running program then click it off with changing the running > program.same as with chorus/flange/phaser etc;? > > > > belphedeus <belphedeus@> wrote: > Answer to your question is yes.Use the LINK button to set it to the > > desired footswitch of the particular program.What kinda foot > > controller are you using? > > I'm relatively new to the GSP but i just linked footswitch 6 - 0 > of > > my Control one to the parameters(effects) so that i can turn it > > on/off a couple of weeks ago. > > > > --- In gsp-2101@yahoogroups.com, matt adams <extreme99zl@> wrote: > > > > > > Very nice. I am rather very new to the gsp2101.I stopped playin > 14 > > years ago.About 6 months ago.I started up again.and purchased the
Show quoted textHide quoted text
> gsp > > off ebay.So i am still learning it's pro and cons. > > > Question. Can a button on the footswitch be programmed to an > > effect. to add to the program you are running as an on and off? > > > > > > MM <strategy400@> > > wrote: > > > 2 Identical chrome face ver. 2.06.06 w/ ppc > > > > > > -----Original Message----- > > > From: gsp-2101@yahoogroups.com [mailto:gsp- > 2101@yahoogroups.com] > > On Behalf Of dunkin_donut3 > > > Sent: Thursday, April 19, 2007 11:19 PM > > > To: gsp-2101@yahoogroups.com > > > Subject: [gsp-2101] How many do you own? > > > > > > 2101? > > > > > > I'm at 4, D'oh! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------- > > > Ahhh...imagining that irresistible "new car" smell? > > > Check outnew cars at Yahoo! Autos. > > > > > > > > > > > > > > > > > --------------------------------- > > Ahhh...imagining that irresistible "new car" smell? > > Check outnew cars at Yahoo! Autos. > > > > > > > > > --------------------------------- > Ahhh...imagining that irresistible "new car" smell? > Check outnew cars at Yahoo! Autos. > > --------------------------------- > Ahhh...imagining that irresistible "new car" smell? > Check outnew cars at Yahoo! Autos. >
Re: How many do you own?
2007-04-22 by belphedeus
ROFL....I see what you mean. --- In gsp-2101@yahoogroups.com, "dunkin_donut3" <dunkin_donut3@...> wrote:
Show quoted textHide quoted text
> > Talk about getting away from the question >