There is also 4 loops version available as well.
I use 4 loops version and I control it using MIDI from my FC One footswitch via GSP2101.
Cheers,
Goddard
Graham Pearson pisze:
I understand your problem.\ufffd The only solution I can recommend is to include a MIDI-controlled audio signal router/switcher in your setup.\ufffd An expensive example of one of these devices is the Voodoo Labs / DMC GCX.\ufffd These are one of the few that are still being manufactured and there are several currently being auctioned on eBay.\ufffd I use an older, discontinued, but just as effective Ibanez EPP-400 for duties such as this.\ufffd You can occasionally see these on eBay also.\ufffdTo solve your problem, you would insert\ufffdyour MIDI-controlled switcher in the GSP-2101's effect loop and, depending on the patch you are currently using, the switcher would either include or bypass your echo unit.\ufffd Of course, these switchers are capable of a lot more than this simple application, but it'll get the job done without having to alter the bowels of your GSP-2101.\ufffdHope this helps.\ufffd Please let us know how you solve this problem.Graham\ufffd\ufffd----- Original Message -----From: d7x13Sent: Tuesday, October 30, 2007 7:34 PMSubject: [gsp-2101] FX Loop
The problem I'm having is that I want the FX loop On/Summed/Bypass
option to control the SEND, not RETURN (as it behaves in all versions
of the 2101). Or, if that's not possible, I'd want so that it turns
on/off both, the return and the send.
Example: I have a high-feedback (90%) echo in the FX Loop. And I'm
going between two patches; we'll call them A and B.
Patch A = Dstrd sound; FX Loop Off
Patch B = Clean sound; FX Loop ON (echo)
Let's say I'm going to play a chorus using Patch A and switch to
Patch B for the next verse. Since the 2101 is set up in a way where
the FX SEND is ALWAYS on..... once I hit that switch, my distortion
will start echo'ing (getting delayed) - and therefore mess up the
sound of the verse.
Is there any kind of firmware upgrade (I already have v3.0.0.a) that
can alter what the On/Summed/Bypass option controls? If not, is it
possible to have it electronically/mechanically edited and if so, do
you happen to know any engineers who can pull this off?