Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Steve wrote:
> Its been a while and my brain is a bit foggy, but I believe
> yes...they did....and that would be the v3 artist upgrade...which you
......

Hmmmm... now I'm just a little bit confused, because I thought that the
Software- Version "3.00.a" is the latest Digitech shipped. Steve, is the "v3
artist upgrade" not the same as the Software- Version "3.00.a".
As I already wrote I use the Software- Version "3.00.a" in my
one-EPROM-Machine.
And in my old 2- EPROM- Machine I stored the "3.00.00" Software- Version to
the EPROMS (a simple copy of the original 3.00.00- EPROMS). And then I
changed the 10 MHz crystal into a 20 MHz, and also the capacitors into 15
pF. So, that I finally get the "3.00.00.a"- Software.

Steve wrote:
> .......... definitely want to get if you can find it.  I would contact
Digitech
> first and see if its still available from them.

You say "available". Do you mean, that once upon a time the software was
downloadable from the net?
Or did they only ship other EPROMs fore those, who has no EPROM- programmer.
But if it isn't availble from Digitech, it's no problem. I think someboby
does have this software, and if this one would send it to me, I will just
reprogram my EPROMs once again.

By the way, of course, I also changed the coil (L27) into an 10 Ohm-
reststor, to eliminate the boot- problem.