Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Message

RE: [gsp-2101] Re: PPC210 and S-DISC-II

2001-03-30 by Steve Schow

wew...way over my head.  I missed the part you said about having 3.0a.  Once
upon a time...we all bought 3.0a and it came to us as a chip replacement.
Unfortunately Digitech did not ever support the method you are doing...which
I must say is pretty impressive to say the least....if you get it all to
work properly.

Sorry for the confusion.

-steve

> -----Original Message-----
> From: Dieter Waechter [mailto:waechter.dieter@...]
> Sent: Thursday, March 29, 2001 10:40 PM
> To: gsp-2101@yahoogroups.com
> Subject: Re: [gsp-2101] Re: PPC210 and S-DISC-II
>
>
> Steve wrote:
> > Its been a while and my brain is a bit foggy, but I believe
> > yes...they did....and that would be the v3 artist
> upgrade...which you
> ......
>
> Hmmmm... now I'm just a little bit confused, because I
> thought that the
> Software- Version "3.00.a" is the latest Digitech shipped.
> Steve, is the "v3
> artist upgrade" not the same as the Software- Version "3.00.a".
> As I already wrote I use the Software- Version "3.00.a" in my
> one-EPROM-Machine.
> And in my old 2- EPROM- Machine I stored the "3.00.00"
> Software- Version to
> the EPROMS (a simple copy of the original 3.00.00- EPROMS). And then I
> changed the 10 MHz crystal into a 20 MHz, and also the
> capacitors into 15
> pF. So, that I finally get the "3.00.00.a"- Software.
>
> Steve wrote:
> > .......... definitely want to get if you can find it.  I
> would contact
> Digitech
> > first and see if its still available from them.
>
> You say "available". Do you mean, that once upon a time the
> software was
> downloadable from the net?
> Or did they only ship other EPROMs fore those, who has no
> EPROM- programmer.
> But if it isn't availble from Digitech, it's no problem. I
> think someboby
> does have this software, and if this one would send it to me,
> I will just
> reprogram my EPROMs once again.
>
> By the way, of course, I also changed the coil (L27) into an 10 Ohm-
> reststor, to eliminate the boot- problem.
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-~>
> Make good on the promise you made at graduation to keep
> in touch. Classmates.com has over 14 million registered
> high school alumni--chances are you'll find your friends!
> http://us.click.yahoo.com/03IJGA/DMUCAA/4ihDAA/X3GVlB/TM
> --------------------------------------------------------------
> -------_->
>
> To unsubscribe from this group, send an email to:
> gsp-2101-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.