Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Thanks for all of the help to everyone!
The only one I have been able to find that says anything about all 5 being connected is the HOSA Midi Cable:

http://www.guitarcenter.com/Hosa-MIDI-Cable-336000-i1440945.gc

http://www.zzounds.com/item--HOSMID3

Is this one anyone would recommend?
I just listed this one because it is the first that I have been able to find that specifically states all 5 wired even though one is shielded.
I am not sure if brand dropping is allowed on here, I am just trying to not deal with the GuitCent people anymore.

Trying to just find the cable that ends my problems so I can get back to jamming!

Thanks For Everything Everyone!

--- In gsp-2101@yahoogroups.com, chris.pelayo@... wrote:
>
> Like M M said you definitely need to have the needed and fully functioning DIN cable. I say fully functioning because many MIDI capable electronic devices actually use only 3 of 5 pins. This is why many MIDI cable manufacturers make 5 pin cables that actually only use 3 of the pins. There's also other types of DIN cables that have more pins but also have only some of the pins wired as well. 
> 
> All that said you just need to get a fully functional 5 pin MIDI to eliminate that as the possible source of your problems. You'll need to avoid the cheapo ones for sure. 
> 
> One other thing is that if you're using the Control 1 or 2101FC Digitech pedal board make sure you're using the designated DIN socket for it and NOT the MIDI one(s). 
> 
> Hope this helps. Let us know how it turns out. 
> 
> -
> Sent from Chris R. Pelayo's Blackberry
> 
> -----Original Message-----
> From: "Roundboy" <iwannabeinapunkband@...>
> Sender: gsp-2101@yahoogroups.com
> Date: Mon, 22 Aug 2011 16:36:20 
> To: <gsp-2101@yahoogroups.com>
> Reply-To: gsp-2101@yahoogroups.com
> Subject: [gsp-2101] Controll One Issue
> 
> I have tried two different cables and not sure whate the problem might be.
> The pedals 1, 2, 6, and 7 all seem to have the same problem.
> When I press them they light up brightly then dim, sometimes I have to tap them twice for the patch to stay.
> When I pressed UTILITY on the GSP 2101 itself and I believe I hit 2, then 2, then 3 which lights up all the leds, 1, 2, 6, and 7 did not light up at all.
> 
> The first cable was a 5-pin din shielded Nuetrik and the second one was a 5 pin din cheap cable from Guitar Center.
> 
> I have tested all with different surge protectors and outlets.
> 
> Any help would be awesome.
> Thanks,
>