Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Page 88, the last sentence: "if your Amp head doesn’t have a second input, a -Y- cable will work just as well".


Best regards, Marko



________________________________
 From: Rick <richard.johnson@...>
To: gsp-2101@yahoogroups.com 
Sent: Wednesday, May 23, 2012 10:47 PM
Subject: Re: [gsp-2101] Re: 4 cable method
 

  
I appreciate all the help, this machine is way 
above me, but i will try it again, the picture of the set up on page 89, 
everything i get, except for the extra jack on the front of the amp.. mine only 
has one input for the guitar.
it looks like in the picture  the guitar 
plugs into the amp and the amp has a output jack on the front that goes into the 
2101... my amp only has an input jack on the 
front...Rick
 
From: vince.a@... 
Sent: Wednesday, May 23, 2012 1:50 PM
To: gsp-2101@yahoogroups.com 
Subject: [gsp-2101] Re: 4 cable method
 
  
Send out to the efx, return into from the efx and within the program...see 
page 89 of the manual, they use the example of a head with effects, but it is 
the same principle:

"Now we are actually feeding the two pre-amps the 
same guitar signal. Most Amp heads have an FX loop, so lets put this to work for 
us. Use an instrument cable to connect the Amp head's FX loop out to the Left 
(mono) FX Loop return of the 2101. Take another cable and connect the
2101's 
Left Output (mono) to the Amp head's FX loop return"

That's the 
"hardware" part of it. There's also options within each program, here's from 
page 7 of the manual - scroll through your program for the FX Loop and you'll 
see:

Bypass : The FX Loop Returns are off, and completely 
ignored.
Summed : The FX Loop Returns are summed together with the original 
signal using a 50:50 ratio.
No Sum :If plugs are connected to the FX Loop 
Return jack(s), they are the primary signal source. If there is no signal 
present at these jacks, you don't hear anything from the GSP-2101 
Artist.

I don't have the unit in front of me, or I would have shared from 
that, but I do have access to the manual right now. 

Hope that 
helps!

--- In mailto:gsp-2101%40yahoogroups.com, 
"Rickenbacker" <richard.johnson@...> wrote:
>
> How do you 
hook this up too the effects loop and do you have to do something to the 2101 to 
turn on the effects, i cannot figure it out in the 
manual..
>

 
No virus found in this 
message.
Checked by AVG - www.avg.com
Version: 2012.0.2176 / Virus 
Database: 2425/5017 - Release Date: 
05/23/12