Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

the picture confuses me, because , there is an input on the amp for the guitar, but the input beside it should be an output, because it has a wire going too the front of the 2101 input...  does that make sense... 

From: Marko Menart 
Sent: Wednesday, May 23, 2012 6:33 PM
To: gsp-2101@...m 
Subject: Re: [gsp-2101] Re: 4 cable method

  

Page 88, the last sentence: "if your Amp head doesn’t have a second input, a -Y- cable will work just as well".


Best regards, Marko



--------------------------------------------------------------------------------
From: Rick <richard.johnson@...>
To: gsp-2101@yahoogroups.com 
Sent: Wednesday, May 23, 2012 10:47 PM
Subject: Re: [gsp-2101] Re: 4 cable method


  
I appreciate all the help, this machine is way above me, but i will try it again, the picture of the set up on page 89, everything i get, except for the extra jack on the front of the amp.. mine only has one input for the guitar.
it looks like in the picture  the guitar plugs into the amp and the amp has a output jack on the front that goes into the 2101... my amp only has an input jack on the front...Rick

From: vince.a@... 
Sent: Wednesday, May 23, 2012 1:50 PM
To: gsp-2101@yahoogroups.com 
Subject: [gsp-2101] Re: 4 cable method

  
Send out to the efx, return into from the efx and within the program...see page 89 of the manual, they use the example of a head with effects, but it is the same principle:

"Now we are actually feeding the two pre-amps the same guitar signal. Most Amp heads have an FX loop, so lets put this to work for us. Use an instrument cable to connect the Amp head's FX loop out to the Left (mono) FX Loop return of the 2101. Take another cable and connect the
2101's Left Output (mono) to the Amp head's FX loop return"

That's the "hardware" part of it. There's also options within each program, here's from page 7 of the manual - scroll through your program for the FX Loop and you'll see:

Bypass : The FX Loop Returns are off, and completely ignored.
Summed : The FX Loop Returns are summed together with the original signal using a 50:50 ratio.
No Sum :If plugs are connected to the FX Loop Return jack(s), they are the primary signal source. If there is no signal present at these jacks, you don't hear anything from the GSP-2101 Artist.

I don't have the unit in front of me, or I would have shared from that, but I do have access to the manual right now. 

Hope that helps!

--- In mailto:gsp-2101%40yahoogroups.com, "Rickenbacker" <richard.johnson@...> wrote:
>
> How do you hook this up too the effects loop and do you have to do something to the 2101 to turn on the effects, i cannot figure it out in the manual..
>


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2176 / Virus Database: 2425/5017 - Release Date: 05/23/12




No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2176 / Virus Database: 2425/5018 - Release Date: 05/23/12