Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

OK GREAT!!! And not a moment to soon as I was JUST about to do a factory reset!!!

Thanks so much for the great information. Very helpful and I’ve very glad to be apart of this forum!!
> On Sep 4, 2016, at 10:36 PM, me@... [gsp-2101] <gsp-2101@yahoogroups.com> wrote:
> 
> Below is a copy of one of MIDIWizard's Help Topics that addresses the "Out of Program Memory" message.
> 
> 
>  <>Error Message: Out Of Program Memory
> 
> If you create a lot of user programs, your GSP-2101 will eventually display the "Out of Program Memory" message when you attempt to store a new user program.
> 
> 
> The first solution to this problem is to reset some of your user programs back to their factory program equivalents. Do this using the following process:
> 
> Make a list of those user programs in the range 001 through 100 you can live without
> 
> For each of these user programs, dial up the corresponding factory program
> 
> For example, dial up factory program 143 for user program 043
> 
> Press the GSP-2101's Store button twice to copy the factory program to the corresponding user program
> 
> The above process releases some program memory. After restoring some user programs to their factory program equivalents, you should be able to continue creating new user programs.
> 
> If the above process releases insufficient memory for all the programs you wish to create, then you'll need to follow a more radical process:
> 
> Make a list of those user programs in the range 001 through 100 you can't live without
> 
> Perform a System Backup
> 
> Use the System Backup file created in step 2 to Create a Set of User Program Files.
> 
> Perform a Factory Reset
> 
> Use the User Programs you created in step 3 to restore the programs you can't live without using the Program Restore feature
> 
> 
>