I find that also so what is
when calibrating, don't go the "extreme" distance either
way.
Leave a tiny bit on each end "uncalibrated". This takes care
of the issue, when you go either way afterwards it reads the full
values.
Do you have the manual for the 2101??
I just re-read your post & see that you're having a hard
time "assigning" the Wah to the ped.
I'll have to dig out my manual & let you know how to
accomplish this.
If I had my 2101 in front of me I could go through it but it's
packed away at the moment.
Cheers
Sean
;
----- Original Message -----From: Jeff RankinSent: Wednesday, January 05, 2005 8:07 AMSubject: Re: [gsp-2101] Programming the WAH with the Control OneI have the 3.0.0 upgrade. The pedal I did calibrate. That was weird because when I go all the way back it doesn't go to 0 it stops at 2 and when pushed forward instead of going to 127 it goes to 122. I guess that might be something with the pedal. If there is a way to make it read 0 that would be cool and 127. I thought that was what the calibration was to do was to reset all to the right parameters. Anyways to make a long story short I did calibarate it. Thanks for you guys wanting to help out :-) I was getting very frustrated.Jeff
krazydog@... wrote:I agree, it's super lame, I doubt you'll ditch your Cry Baby.
Is your C1 expression pedal calibrated??
I believe it's through the utility button you'll find the calibration.
Cheers
Sean
----- Original Message -----
From: "Pedro Ferreira"
To:
Sent: Monday, January 03, 2005 1:36 PM
Subject: RE: [gsp-2101] Programming the WAH with the Control One
>
> The wah sucks, but anyway... You must tell what is the version of your
2101
> so that we can help you. It is displayed when you turn the unit on.
>
>
>
> -----Mensagem original-----
> De: jeffrankin101 [mailto:jeffrankin101@...]
> Enviada: segunda-feira, 3 de Janeiro de 2005 18:22
> Para: gsp-2101@yahoogroups.com
> Assunto: [gsp-2101] Programming the WAH with the Control One
>
>
>
> I have just purchased this unit and like it a lot however I can not
> figure out how to program the traditional wah. I figured how to add
> it to the algorithm by reading the manual but I did not see how to
> add the expression pedal to it. Can someone help me with this
> please. Currently I am using a crybaby wah then going to the effect
> processor. I would like to use the 2101 for all its worth if the wah
> sounds good.
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Jeff RankinAIM: JEFFRANKIN101Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.