Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Like everyone else.  Same thing happened to me.  I work at a TV station so 
I had one of our tech guys look at it.  He said the Voltage regulatoors in 
there were cheap and he replaced it with an industrial strength one.  I did 
the soldering though.  You have to be careful but wasn't that tough to do.

At 07:57 PM 8/21/2005 +0000, you wrote:
>I bought my GSP new back in the mid 90's and have never had much of a
>problem with it. Several years ago, I replaced the tubes and added a
>second disc processor. I believe I am running 2.01.01. I do not have
>the "artist version/3.0"
>
>Yesterday, when I turned on the power the following happened:
>Initially everything was fine then the lcd started to dim and went
>completely blank. I shut off the power and started in back up. The
>green lcd screen is blank and the program number is reading 8.8.8.,
>the clip is red at 0db, and the input, gain1, eq, level, ovr, byp are
>all red, link and edit are not lit. I have tried powering up with the
>utility bottom pushed in with no success. Also, I have tried a
>factory reset by holding the function 1 button in while powering up.
>
>Any suggestions would be greatly appreciated.
>
>
>
>
>
>
>----------
>YAHOO! GROUPS LINKS
>    *  Visit your group "<http://groups.yahoo.com/group/gsp-2101>gsp-2101" 
> on the web.
>    *
>    *  To unsubscribe from this group, send an email to:
>    * 
> <mailto:gsp-2101-unsubscribe@yahoogroups.com?subject=Unsubscribe>gsp-2101-unsubscribe@yahoogroups.com 
>
>    *
>    *  Your use of Yahoo! Groups is subject to the 
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
>
>
>----------