Do you know what part no. to look for the voltage regulators? And are the 3 the same? --- Tod Brueske <tbrueske@...> wrote: > Like everyone else. Same thing happened to me. I > work at a TV station so > I had one of our tech guys look at it. He said the > Voltage regulatoors in > there were cheap and he replaced it with an > industrial strength one. I did > the soldering though. You have to be careful but > wasn't that tough to do. > > At 07:57 PM 8/21/2005 +0000, you wrote: > >I bought my GSP new back in the mid 90's and have > never had much of a > >problem with it. Several years ago, I replaced the > tubes and added a > >second disc processor. I believe I am running > 2.01.01. I do not have > >the "artist version/3.0" > > > >Yesterday, when I turned on the power the following > happened: > >Initially everything was fine then the lcd started > to dim and went > >completely blank. I shut off the power and started > in back up. The > >green lcd screen is blank and the program number is > reading 8.8.8., > >the clip is red at 0db, and the input, gain1, eq, > level, ovr, byp are > >all red, link and edit are not lit. I have tried > powering up with the > >utility bottom pushed in with no success. Also, I > have tried a > >factory reset by holding the function 1 button in > while powering up. > > > >Any suggestions would be greatly appreciated. > > > > > > > > > > > > > >---------- > >YAHOO! GROUPS LINKS > > * Visit your group > "<http://groups.yahoo.com/group/gsp-2101>gsp-2101" > > on the web. > > * > > * To unsubscribe from this group, send an > email to: > > * > > > <mailto:gsp-2101-unsubscribe@yahoogroups.com?subject=Unsubscribe>gsp-2101-unsubscribe@yahoogroups.com > > > > > * > > * Your use of Yahoo! Groups is subject to the > > <http://docs.yahoo.com/info/terms/>Yahoo! Terms of > Service. > > > > > > > >---------- > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Message
Re: [gsp-2101] 2101 LCD is blank, unit is frozen, not responding to buttons
2005-08-24 by Nelson Nelson
Attachments
- No local attachments were found for this message.