it´s as simple as that:
2101 midi out connected to jmp-1 midi in.
on the 2101 press [midi], press [next] five times. in line 1
set the midi channel to the same, that the jmp-1 is set to.
in lines 2 and 3 you now can determine, which 2101 program is
to recall which jmp-1 program.
you have the option to control four different devices
individually (when line 1 is selected, press [up] or [down] to toggle between
them).
in the ;previous menu (press [prev]) you may want to set,
if the jmp is to change patches also, when you change patches on the front panel
of the 2101.
hope that helps.
klaus
Show quoted textHide quoted text
----- Original Message -----
Sent: Thursday, March 13, 2003 7:07
AM
Subject: [gsp-2101] using Control One to
change patches on other rack devices?!?
I have a 2101, and a Marshall JMP-1 preamp. I have
them midi'd
together with the control one foot pedal, but I cannot figure
out how
to simply set the control one to not only switch between patches
on
the 2101 for me but also switch between patches on my JMP-1. I
know
this must be possible, but I cannot really find what seems to
be the
answer in the manual. Can someone point me in the right
direction
please? thanks!
To
unsubscribe from this group, send an email
to:
gsp-2101-unsubscribe@egroups.com
Your use of
Yahoo! Groups is subject to the Yahoo! Terms of Service.
