Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Hi. 
I have a 2101LE 2.01.01a
Does anyone know if the 2101 can send midi cc?
I have some of the pedals on the Control One sending cc for FX on\off.
I'm getting a midi swithcer to control channelswitching on my Mesa 
Studio Pre.
Can I control the midiswitcher with midi cc from the 2101?
Thanks
Phrode

Yes you can send MIDI cc.  It's a little complicated but it can be done.  I 
control a wah in an amp modeler (the POD XT) and it works great with less 
(if any) lag time than using the GSP's wah!!!!!  I can't right now but if 
you need me to walk you through it I will.  I just need to know what CC 
control number your using to control the channel switching.

>Hi.
>I have a 2101LE 2.01.01a
>Does anyone know if the 2101 can send midi cc?
>I have some of the pedals on the Control One sending cc for FX on\off.
>I'm getting a midi swithcer to control channelswitching on my Mesa
>Studio Pre.
>Can I control the midiswitcher with midi cc from the 2101?
>Thanks
>Phrode
>
>
>Yahoo! Groups Sponsor
>ADVERTISEMENT
>
>To unsubscribe from this group, send an email to:
>gsp-2101-unsubscribe@egroups.com
>
>
>
>Your use of Yahoo! Groups is subject to the 
><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.

Hi.
The midiswitcher I'm thinking about is axess-electronics CFX4.
It can operate with both cc and programchange.

I have set up my Control One so that button 6-10 activates midi cc 
for turning FX on or off.

I'm wondering if I could change channels on the Mesa, just by 
pressing the cc-toggle button on the footswich?
Do the Midi CC signal leave the 2101, or do I need a program change?

Phrode

Yes it does.  You just have to make sure the CFX4 is set to the same MIDI 
channel.  That's what I am doing with my Pod XT and it works great.  I have 
the rocker pedal set to CC4 which is what controller the Pod XT wah is set 
to but I don't have it connected to any 2101 parameters.

At 03:31 PM 3/5/2003 +0000, you wrote:

>Hi.
>The midiswitcher I'm thinking about is axess-electronics CFX4.
>It can operate with both cc and programchange.
>
>I have set up my Control One so that button 6-10 activates midi cc
>for turning FX on or off.
>
>I'm wondering if I could change channels on the Mesa, just by
>pressing the cc-toggle button on the footswich?
>Do the Midi CC signal leave the 2101, or do I need a program change?
>
>Phrode
>
>
>Yahoo! Groups Sponsor
>ADVERTISEMENT
>
>To unsubscribe from this group, send an email to:
>gsp-2101-unsubscribe@egroups.com
>
>
>
>Your use of Yahoo! Groups is subject to the 
><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.

Can you control where the wah starts, so if you want to start with 
the wah at position 60?
How do you turn your wah on and off?


--- In gsp-2101@yahoogroups.com, Tod Brueske <tbrueske@k...> wrote:
> Yes it does.  You just have to make sure the CFX4 is set to the 
same MIDI 
> channel.  That's what I am doing with my Pod XT and it works 
great.  I have 
> the rocker pedal set to CC4 which is what controller the Pod XT wah 
is set 
> to but I don't have it connected to any 2101 parameters.
> 
> At 03:31 PM 3/5/2003 +0000, you wrote:
> >Hi.
> >The midiswitcher I'm thinking about is axess-electronics CFX4.
> >It can operate with both cc and programchange.
> >
> >I have set up my Control One so that button 6-10 activates midi cc
> >for turning FX on or off.
> >
> >I'm wondering if I could change channels on the Mesa, just by
> >pressing the cc-toggle button on the footswich?
> >Do the Midi CC signal leave the 2101, or do I need a program 
change?

> >
> >Phrode
> >
> >
> >Yahoo! Groups Sponsor
> >ADVERTISEMENT
> >
> >To unsubscribe from this group, send an email to:
> >gsp-2101-unsubscribe@egroups.com
> >
> >
> >
> >Your use of Yahoo! Groups is subject to the 
> ><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.

I'm not sure what you're asking.  You can control where the wah is 
when you first go to the patch and that depends on how you saved it 
on the device to be controlled.  If you mean you want to control the 
amount of wah i.e. the beginning and the end of the wah range, you 
can do that by limiting the range in the 2101 expression pedal.  I 
believe that it is patch specific so the range you set for one patch 
would be different for the next patch.  I don't switch my wah on and 
off but you just need to find what controller number (CC number) the 
wah on off switch uses and assign a footswitch to that.


--- In gsp-2101@yahoogroups.com, "phrodes" <phrode@n...> wrote:
> Can you control where the wah starts, so if you want to start with 
> the wah at position 60?
> How do you turn your wah on and off?
> 
> 
> --- In gsp-2101@yahoogroups.com, Tod Brueske <tbrueske@k...> wrote:
> > Yes it does.  You just have to make sure the CFX4 is set to the 
> same MIDI 
> > channel.  That's what I am doing with my Pod XT and it works 
> great.  I have 
> > the rocker pedal set to CC4 which is what controller the Pod XT 
wah 
> is set 
> > to but I don't have it connected to any 2101 parameters.
> > 
> > At 03:31 PM 3/5/2003 +0000, you wrote:
> > >Hi.
> > >The midiswitcher I'm thinking about is axess-electronics CFX4.
> > >It can operate with both cc and programchange.
> > >
> > >I have set up my Control One so that button 6-10 activates midi 
cc

> > >for turning FX on or off.
> > >
> > >I'm wondering if I could change channels on the Mesa, just by
> > >pressing the cc-toggle button on the footswich?
> > >Do the Midi CC signal leave the 2101, or do I need a program 
> change?
> > >
> > >Phrode
> > >
> > >
> > >Yahoo! Groups Sponsor
> > >ADVERTISEMENT
> > >
> > >To unsubscribe from this group, send an email to:
> > >gsp-2101-unsubscribe@egroups.com
> > >
> > >
> > >
> > >Your use of Yahoo! Groups is subject to the 
> > ><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.

Now I've hooked the Digitech midi out to my computer.
I still have a question.

Is it possible to have the 2101 to send out midi cc when I change 
preset\program?

It transmits midi cc when I toggle the midi cc manually but not when 
I just change the programs.

Yes I have. That didn't work.

Could it be a softwarething?
I have a 2101 LE 2.01.01 .a
Could it be as simple as an artist upgrade?



> have you set the 2101 to "send front panel change=yes" in the midi 
menu?
> klaus