Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Thread

Setup for 2101 & TriaAxis using NoiseGate & Tuner

Setup for 2101 & TriaAxis using NoiseGate & Tuner

2003-06-19 by mb

Setup for 2101 &; TriaAxis using NoiseGate & Tuner
hello, greetigs from germany;-D

I play a TriAxis and the GSP as a standard setup meaning

Guitar -> TriAxis
TriAxis FX Send -> GSP Return
GSP Out -> TriAxis Return
TriAxis Out -> Amp

, right?!

It works fine!!
The only problem is that the NoiseGate and the tuner won't work that way, same to the Volume Pedal used for Master Volume.
I would "only" need the TriAxis PreAmp and the digital section of the GSP but with the desired Gate, Volume and Tuner functions.

Can anybody help?!
www.cd-pla.net - cd review community

Re: [gsp-2101] Setup for 2101 & TriaAxis using NoiseGate & Tuner

2003-06-22 by Tod Brueske

Here's one possibility:

Guitar -> GSP In
GSP FX Send -> Triaxis
Then back to your path
TriAxis FX Send -> GSP Return
GSP Out -> TriAxis Return
TriAxis Out -> Amp

With this you HAVE to make sure that you're wet/dry mixer is always 100% 
wet and the FX loop is set to No Sum.  Anything less than the 100% wet and 
you will start to hear the GSP analog section with out your Triaxis.
Using it this way you have to adjust the wet dry levels using the mixers in 
the algorithm but that's the way I always preferred to do it anyway

You could also do it this way:

Guitar -> GSP In
GSP FX Send -> Triaxis
TriAxis Out -> GSP Return
GSP Out -> Amp

Which is the way I generally do it.  Still keeping wet/dry at 100% and FX 
loop set to No Sum.




At 08:28 PM 6/19/2003 +0200, you wrote:
Show quoted textHide quoted text
>
>Setup for 2101 & TriaAxis using NoiseGate & Tuner
>
>----------
>hello, greetigs from germany;-D
>
>I play a TriAxis and the GSP as a standard setup meaning
>
>Guitar -> TriAxis
>TriAxis FX Send -> GSP Return
>GSP Out -> TriAxis Return
>TriAxis Out -> Amp
>
>, right?!
>
>It works fine!!
>The only problem is that the NoiseGate and the tuner won't work that way, 
>same to the Volume Pedal used for Master Volume.
>I would "only" need the TriAxis PreAmp and the digital section of the GSP 
>but with the desired Gate, Volume and Tuner functions.
>
>Can anybody help?!
>
>
><http://www.michaelborchers.net/sb>www.michaelborchers.net/sb - personal
><http://www.michaelborchers.net/tri>www.michaelborchers.net/tri - TriAxis
><http://www.michaelborchers.net/rm>www.michaelborchers.net/rm - Rockman
><http://www.memoriesfading.de>www.memoriesfading.de - band
><http://www.cd-pla.net>www.cd-pla.net - cd review community
>
>
>Yahoo! Groups 
>Sponsor<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=1705031959:HM/A=1564416/R=0/SIG=11ti81skc/*http://www.netflix.com/Default?mqso=60164797&partid=3170658> 
>
>
>To unsubscribe from this group, send an email to:
>gsp-2101-unsubscribe@egroups.com
>
>
>
>Your use of Yahoo! Groups is subject to the 
><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.