Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Thread

RE: [gsp-2101] looping a stompbox

RE: [gsp-2101] looping a stompbox

2001-04-30 by Chris Sherwood

From: Yulham Ferdiansyah [mailto:ferdian@...]
guys, is it possible to play with stompboxes effects before goes to the input of 2101? (i.e: i want to play with boss turbo distortion & using the digital section of 2101 such as delay, chorus & reverb, & turn off the analog section of 2101 -the 2101 distortion section-)?
Sure, I use a wah, an over-drive pedal and a volume pedal before I go into any amp or preamp.
Chris

looping a stompbox

2001-04-30 by Yulham Ferdiansyah

guys, is it possible to play with stompboxes effects before goes to the input of 2101? (i.e: i want to play with boss turbo distortion & using the digital section of 2101 such as delay, chorus & reverb, & turn off the analog section of 2101 -the 2101 distortion section-)?
thanx
ferdi

Re: [gsp-2101] looping a stompbox

2001-04-30 by Yulham Ferdiansyah

but, is it ok to have a compressor after the over drive effect (if i put the over drive before 2101, so the compressor will be after the over drive in the algorythm), or should it be always before the over drive (in 2101 algorythm, the compressor is placed before overdrive...is it?)...
thanx Chris
Ferdi
Show quoted textHide quoted text
----- Original Message -----
Sent: Tuesday, May 01, 2001 5:21 AM
Subject: RE: [gsp-2101] looping a stompbox

From: Yulham Ferdiansyah [mailto:ferdian@...]
guys, is it possible to play with stompboxes effects before goes to the input of 2101? (i.e: i want to play with boss turbo distortion & using the digital section of 2101 such as delay, chorus & reverb, & turn off the analog section of 2101 -the 2101 distortion section-)?
Sure, I use a wah, an over-drive pedal and a volume pedal before I go into any amp or preamp.
Chris


To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

RE: [gsp-2101] looping a stompbox

2001-04-30 by Chris Sherwood

There is nothing technically wrong with it. You will not harm the unit. All the GSP cares about is a reasonably proper signal level input. As for what would sound better, well, I have never had a problem feeding an over-driven signal to the GSP, even when a GSP patch employs a compressor module. I do see your point that it is better to have the compressor before, but there none of these rules are set in stone.
Eh?
Show quoted textHide quoted text
-----Original Message-----
From: Yulham Ferdiansyah [mailto:ferdian@pro.net.id]
Sent: Monday, April 30, 2001 3:58 PM
To: gsp-2101@yahoogroups.com
Subject: Re: [gsp-2101] looping a stompbox

but, is it ok to have a compressor after the over drive effect (if i put the over drive before 2101, so the compressor will be after the over drive in the algorythm), or should it be always before the over drive (in 2101 algorythm, the compressor is placed before overdrive...is it?)...
thanx Chris
Ferdi
----- Original Message -----
Sent: Tuesday, May 01, 2001 5:21 AM
Subject: RE: [gsp-2101] looping a stompbox

From: Yulham Ferdiansyah [mailto:ferdian@...]
guys, is it possible to play with stompboxes effects before goes to the input of 2101? (i.e: i want to play with boss turbo distortion & using the digital section of 2101 such as delay, chorus & reverb, & turn off the analog section of 2101 -the 2101 distortion section-)?
Sure, I use a wah, an over-drive pedal and a volume pedal before I go into any amp or preamp.
Chris


To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.