Lpc2000

--- In lpc2100@yahoogroups.com, "vidya_srinivas2000"
<vidya_srinivas2000@y...> wrote:
> hello all
> v have a lpc2106 board from nohau.
> i was trying to use both UART0 & 1 when my board stopped working.
> i was writing to UART0 and also to UART1
> i am not able to download my program now with the ISP.
> all the voltages seem to be right and most of all my program still 
> works - i.e it is transmitting on UART0 but not on UART1 - 
> and i have drawn this inference from it that the UART1 has gone bad 
> and since the DCD1 - Pin0_14 (of the UART1) has to be low to continue 
> with ISP i am not able to download from ISP.
> if this is the case - any work arounds ?
> if not please can somebody tell me the cost of the processor(not the 
> board) 
> thanks

Further to my previous post, have you checked the integrity of the
connections between the RS-232 connector and the LPC2106? You might
simply have a bad solder joint somewhere.

Leon