Lpc2000

----- Original Message ----- 
From: "vidya_srinivas2000" <vidya_srinivas2000@...>
To: <lpc2100@yahoogroups.com>
Sent: Saturday, November 29, 2003 4:31 AM
Subject: [lpc2100] UART1 - lpc2106


> hello all
> v have a lpc2106 board from nohau.
> i was trying to use both UART0 & 1 when my board stopped working.
> i was writing to UART0 and also to UART1
> i am not able to download my program now with the ISP.
> all the voltages seem to be right and most of all my program still
> works - i.e it is transmitting on UART0 but not on UART1 -
> and i have drawn this inference from it that the UART1 has gone bad
> and since the DCD1 - Pin0_14 (of the UART1) has to be low to continue
> with ISP i am not able to download from ISP.
> if this is the case - any work arounds ?
> if not please can somebody tell me the cost of the processor(not the
> board)
> thanks

I've just bought 20 pcs LPC2106 from Avnet (UK). They worked out at just
under 10 GBP each with carriage and VAT. About $16 each.

The Nohau board seems easy to damage for some reason. A client of mine
zapped the JTAG on theirs and I replaced the '2106 with a '2104, all I had
at the time. It was a bit tricky, I used ChipQuik to remove the duff chip.

Leon