Lpc2000

hi,
             have u read the device id (you can read this by flash downloader).Is it matches with your specified part.
 
Regards,
Pandurang S.

________________________________

From: lpc2000@yahoogroups.com on behalf of ???
Sent: Fri 4/29/2005 8:54 AM
To: lpc2000@yahoogroups.com
Subject: Re: [lpc2000] Re: LPC2000 Flash utilty problem


Thanks for your response. 

I don't know what I do according to your message. 

What program is 'dsdc.exe'?. What does that roll? 
Where do I execute that, 'bsdc -l comX' 

What is the boot loader jumper? 

Does you have any document for this? 

I want to reply a detail reponse. 
You can do that? I am sorry. 

  ----- Original Message ----- 
  From: jayasooriah 
  To: lpc2000@yahoogroups.com 
  Sent: Saturday, April 29, 2006 10:26 AM 
  Subject: [lpc2000] Re: LPC2000 Flash utilty problem 


  --- In lpc2000@yahoogroups.com, ±èµ¿ÈÖ <dhkim@...> wrote: 

  > I now design a test board using LPC2214. 
  > When I download hex code to target, I use the LPC2000 flash utility. 
  > 
  > If my hex code is over 130KB, flash utility annouces the following 
  message. 
  > "Code in HEX file exceeds Flash Limitations!" 
  > 
  > The internal flash of LPC2214 is 256KB. 
  > But my code size is about 130KB. 
  > 
  > Why does this problem happen to? 
  > How can I settle to this problem? 

  Try my diagnostic tool available at: 

      http://www.cse.unsw.edu.au/~jayas/esdk/files/lpc/bsdc.exe 

  Install the boot loader jumper, reset the target board and run this 
  command as: 

      bsdc -l comX 

  where COMX is the serial port your board is connected to. 

  It should print enough information from boot sector about your device 
  that may give a hint as to what is happening. 

  Jaya 





  SPONSORED LINKS Microcontrollers  Microprocessor  Intel microprocessors  


------------------------------------------------------------------------------ 
  YAHOO! GROUPS LINKS 

    a..  Visit your group "lpc2000" on the web. 
      
    b..  To unsubscribe from this group, send an email to: 
     lpc2000-unsubscribe@yahoogroups.com 
      
    c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


------------------------------------------------------------------------------ 



[Non-text portions of this message have been removed]




SPONSORED LINKS 
Microcontrollers <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&c=3&s=69&.sig=c-HXthtbZy4TZbI3ib0PMg>  	Microprocessor <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&c=3&s=69&.sig=ijt0SspWtjogcHCuFD0lUQ>  	Intel microprocessors <http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&c=3&s=69&.sig=WOZdpklkgHbXR5quAgrl5w>  	

________________________________

YAHOO! GROUPS LINKS 


	
*	 Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000> " on the web.
	  
*	 To unsubscribe from this group, send an email to:
	 lpc2000-unsubscribe@yahoogroups.com <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
	  
*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . 


________________________________




[Non-text portions of this message have been removed]