Lpc2000

nonuckingfumber wrote:

> --- In lpc2000@yahoogroups.com, Jens Hildebrandt
> <jens.hildebrandt@r...> wrote:
> 
> 
>>The Eval-Board I use for myself has an LPC2104/05/06, one full
> 
> serial Port and 
> 
>>one serial port configurable as either RS232 with Rx/Tx or
> 
> 2-Wire/4-Wire RS485. 
> 
>>If you want, you can get the Schematics and Gerber Files. The PCB
> 
> was made at 
> 
>>olimex.com, components were hand soldered. Nothing great but it
> 
> works and 
> 
>>probably would satisfy your needs.
>>
>>Jens
> 
> 
> Sounds ideal......but I cannot find any reference of it, or any
> reference to RS485 on thier 210x based boards. Dou you have any
> name/ref number for it?
> 
> 

Sorry, seems that I did not make myself clear. I used Olimex' PCB prototype 
service to manufacture the PCB, PCB design and assembly I did myself. Just 
thought that if you don't find a readymade board you could probably reuse my 
board design.