Lpc2000

--- In lpc2000@yahoogroups.com, Jens Hildebrandt
<jens.hildebrandt@r...> wrote:
> nonuckingfumber wrote:
> 
> > --- In lpc2000@yahoogroups.com, Jens Hildebrandt
> > <jens.hildebrandt@r...> wrote:
> > 
> > 
> >>The Eval-Board I use for myself has an LPC2104/05/06, one full
> > 
> > serial Port and 
> > 
> >>one serial port configurable as either RS232 with Rx/Tx or
> > 
> > 2-Wire/4-Wire RS485. 
> > 
> >>If you want, you can get the Schematics and Gerber Files. The PCB
> > 
> > was made at 
> > 
> >>olimex.com, components were hand soldered. Nothing great but it
> > 
> > works and 
> > 
> >>probably would satisfy your needs.
> >>
> >>Jens
> > 
> > 
> > Sounds ideal......but I cannot find any reference of it, or any
> > reference to RS485 on thier 210x based boards. Dou you have any
> > name/ref number for it?
> > 
> > 
> 
> Sorry, seems that I did not make myself clear. I used Olimex' PCB
prototype 
> service to manufacture the PCB, PCB design and assembly I did
myself. Just 
> thought that if you don't find a readymade board you could probably
reuse my 
> board design.


First lot I just need 16 boards....Olimex have allready sent me a
discounted offer for that so I will probably use that and solder my
own buffers on the breadboard.

If all goes OK and we get further orders I suppose Olimex would be
happy to do me a better made version of my customised board ;-)

Thanks for the tip off!