Bruce, I'm using home made wiggler interface as per Schematic given in JTAG.ZIP in group files. Where can I get information regarding which loopback pins connection. Also looking for older version of 2.06version OCD commander software. Thanks, Ken --- In lpc2000@yahoogroups.com, Bruce Paterson <bruce@t...> wrote: > kenbnny wrote: > > > > > Hello Guys, > > > > I'm using OCD commander software of Macraigor Systems for connecting > > to the LPC device using "WIGGLER" Interface. > > > > Does anybody know why always I get this message reported. > > "Error Response from INITIALIZE: 0x03 initialize_target : cable > > disconnected (10 : 03)" > > Are you using a Macraigor Wiggler or a home built one ? > Recently Macraigor added code to their later ocd commander on ocdremote > software to sense a looped back pin to see if a 'real' wiggler or not. > > Suggestions: > * Try an older version of ocd commander (I don't have, but sure someone > here will. I only have an older version of ocdremote). > * Look back through this list history to see which pins need to be > looped back on a home grown wiggler to make it look like a macraigor. > * Check your parallel port is in EPP mode (CMOS setup). > > > -- > Cheers, > Bruce > ------------------------------------------------------------------- > This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom > they are addressed. If you have received this email in error please > notify the system manager. > > /\\\/\\\/\\\ / / Bruce Paterson > / \\\ \\\ \\\ / / Senior Design Engineer > / /\\\/\\\/\\\/ / 8 Anzed Court, Mulgrave, Vic, 3170 > / / \\\ \\\ \\\ / PO Box 4112, Mulgrave, Vic, 3170, Australia > / / \\\/\\\ \\\/ Ph: +61 3 8561 4232 Fax: +61 3 9560 9055 > Tele-IP Ltd. Email: bruce@t... Icq: #32015991 > WWW: http://www.tele-ip.com VK3TJN > -------------------------------------------------------------------
Message
Re: OCD commander
2005-02-22 by kenbnny